Diesel Exhaust & DPF Systems Flashcards
6 cards from real Exhaust practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Diesel Exhaust & DPF Systems flashcards as text
What does DPF stand for in diesel vehicle exhaust systems?
Answer: Diesel Particulate Filter
DPF stands for Diesel Particulate Filter, a device that physically captures soot and particulate matter from diesel exhaust gases before they are released into the atmosphere.
What initiates an 'active regeneration' cycle in a diesel DPF system?
Answer: ECU detecting that soot load has reached a threshold and injecting extra fuel to raise exhaust temperatures
Active regeneration is triggered automatically by the ECU when soot accumulation reaches a set level; the ECU injects extra fuel to raise exhaust temperatures high enough to burn off trapped soot.
What warning should a diesel driver heed to prevent DPF damage?
Answer: Avoid frequent short trips that prevent the DPF from reaching regeneration temperatures
Frequent short trips keep exhaust temperatures too low for passive regeneration, causing soot to accumulate until the DPF becomes blocked and requires expensive cleaning or replacement.
What is 'DPF delete' and why is it illegal for street use in the US?
Answer: Physically removing the DPF; it is illegal because it violates federal emissions laws
DPF delete removes the particulate filter from the exhaust system, which violates the Clean Air Act and EPA emissions regulations, making the vehicle illegal for on-road use in the United States.
What is 'passive DPF regeneration'?
Answer: The DPF self-cleans during normal highway driving when exhaust temperatures are naturally high enough
Passive regeneration occurs naturally during sustained highway driving when exhaust temperatures rise high enough to continuously oxidize soot, preventing accumulation without ECU intervention.
What additive is sometimes used in European diesel systems to lower the soot ignition point and assist DPF regeneration?
Answer: Fuel-borne catalyst (FBC) containing cerium or iron
Some European diesel systems use a fuel-borne catalyst (FBC) containing metallic additives like cerium or iron, which coat soot particles and lower the temperature required to oxidize them during regeneration.