EWP Licence – Elevated Work Platform (TLILIC0005) — Questions and Answers
Question 1: When is it appropriate to use administrative controls for Traffic Management Around EWPs risks?
- As the first choice always
- Never
- Only on weekends
- When elimination, substitution, isolation, and engineering controls are not reasonably practicable (Correct answer)
Correct answer: When elimination, substitution, isolation, and engineering controls are not reasonably practicable
Administrative controls (procedures, training, rotation) should be used when higher-level controls cannot adequately reduce the risk.
Question 2: What is the role of workplace safety committees in Traffic Management Around EWPs management?
- No role
- Planning social events
- Setting worker salaries
- Facilitating cooperation between the PCBU and workers, reviewing safety procedures, and recommending improvements (Correct answer)
Correct answer: Facilitating cooperation between the PCBU and workers, reviewing safety procedures, and recommending improvements
Safety committees provide a structured forum for cooperation between management and workers on WHS matters.
Question 3: In Australian Australian EWP operations, what is the primary purpose of Harness and Restraint Systems procedures?
- To protect worker health and safety through systematic hazard management (Correct answer)
- To increase paperwork
- To satisfy insurance companies
- To slow down operations
Correct answer: To protect worker health and safety through systematic hazard management
Harness and Restraint Systems procedures are fundamental to protecting workers under Australian Australian EWP operations regulations.
Question 4: What is a Provisional Improvement Notice (PIN) in the context of Safe Operating Procedures?
- A workplace award
- A notice issued by a trained HSR requiring a contravention of WHS law to be remedied within a specified period (Correct answer)
- A salary increment notice
- A construction permit
Correct answer: A notice issued by a trained HSR requiring a contravention of WHS law to be remedied within a specified period
Trained HSRs can issue PINs when they believe a WHS contravention has occurred, requiring the PCBU to remedy the issue.
Question 5: What is the importance of near-miss reporting for WHS Legislation for EWPs?
- They should only be discussed informally
- Near misses are not important
- They complicate record keeping
- Near misses reveal existing hazards and allow preventive action before injuries occur (Correct answer)
Correct answer: Near misses reveal existing hazards and allow preventive action before injuries occur
Near misses are valuable indicators of hazards that could cause future injuries — reporting them enables preventive action.
Question 6: What is a Provisional Improvement Notice (PIN) in the context of Rescue Procedures?
- A construction permit
- A notice issued by a trained HSR requiring a contravention of WHS law to be remedied within a specified period (Correct answer)
- A salary increment notice
- A workplace award
Correct answer: A notice issued by a trained HSR requiring a contravention of WHS law to be remedied within a specified period
Trained HSRs can issue PINs when they believe a WHS contravention has occurred, requiring the PCBU to remedy the issue.
Question 7: What is the hierarchy of controls for managing WHS Legislation for EWPs risks?
- No hierarchy exists
- Administrative controls only
- Elimination, substitution, isolation, engineering, administrative, PPE — most to least effective (Correct answer)
- PPE first, then other controls
Correct answer: Elimination, substitution, isolation, engineering, administrative, PPE — most to least effective
The hierarchy ranks controls from most effective (elimination) to least effective (PPE), guiding risk control decisions.
Question 8: Under Australian regulations, who bears primary responsibility for Ground Conditions Assessment compliance?
- The PCBU (Person Conducting a Business or Undertaking) (Correct answer)
- The general public
- Equipment suppliers
- Workers only
Correct answer: The PCBU (Person Conducting a Business or Undertaking)
The PCBU has the primary duty under the WHS Act to ensure compliance with all safety requirements.
Question 9: What supervisory requirements exist for Safe Operating Procedures activities?
- Adequate supervision by competent persons, proportionate to the level of risk (Correct answer)
- No supervision needed
- Supervision is optional
- Only new workers need supervision
Correct answer: Adequate supervision by competent persons, proportionate to the level of risk
The level of supervision must be proportionate to the risk level, with competent supervisors overseeing the work.
Question 10: What is a Code of Practice relevant to Rescue Procedures?
- A company internal policy
- A voluntary suggestion only
- A marketing document
- A practical guide approved under WHS legislation that can be used as evidence of what is reasonably practicable (Correct answer)
Correct answer: A practical guide approved under WHS legislation that can be used as evidence of what is reasonably practicable
Codes of Practice provide practical guidance with legal significance — they can be cited as evidence of what is known and reasonably practicable.
Question 11: What consultation requirements exist for Ground Conditions Assessment under WHS law?
- None — management decides alone
- Only senior workers are consulted
- Consultation is voluntary
- Workers must be consulted on matters affecting their health and safety, with genuine opportunity to provide input (Correct answer)
Correct answer: Workers must be consulted on matters affecting their health and safety, with genuine opportunity to provide input
WHS law requires genuine consultation with workers on matters affecting their safety, including through HSRs and committees.
Question 12: What is the role of a WHS inspector regarding WHS Legislation for EWPs compliance?
- To monitor compliance, investigate incidents, provide guidance, and issue improvement or prohibition notices (Correct answer)
- To manage the project
- To provide insurance
- To do the work themselves
Correct answer: To monitor compliance, investigate incidents, provide guidance, and issue improvement or prohibition notices
WHS inspectors enforce legislation through monitoring, investigation, guidance, and enforcement notices.
Question 13: What is the first step in a Harness and Restraint Systems risk assessment?
- Implement controls
- Identify all hazards associated with ${subjectName} (Correct answer)
- Buy new equipment
- Write the final report
Correct answer: Identify all hazards associated with ${subjectName}
Hazard identification is always the first step — you cannot assess or control risks you have not identified.
Question 14: What record retention period applies to Load Limits and Capacities documents under WHS Regulations?
- Until the end of the project
- 1 month
- No retention required
- Typically 5 years, or 30 years for health monitoring and asbestos records (Correct answer)
Correct answer: Typically 5 years, or 30 years for health monitoring and asbestos records
Most WHS records must be kept for 5 years, with longer periods for specific records such as health monitoring (30 years) and asbestos.
Question 15: What penalties apply for non-compliance with WHS Legislation for EWPs regulations in Australia?
- No penalties
- Significant fines (up to millions of AUD for corporations) and potential imprisonment for serious offences (Correct answer)
- A small administrative fee
- A verbal warning only
Correct answer: Significant fines (up to millions of AUD for corporations) and potential imprisonment for serious offences
Australian WHS penalties are severe, with Category 1 offences carrying fines up to AUD 3 million and potential imprisonment.
Question 16: What obligation does a worker have if they identify a Pre-Operational Inspections hazard?
- No obligation
- Document it in their personal diary only
- Report it immediately to their supervisor or HSR, and take reasonable care to protect themselves and others (Correct answer)
- Fix it themselves without telling anyone
Correct answer: Report it immediately to their supervisor or HSR, and take reasonable care to protect themselves and others
Workers have a legal obligation to report hazards and take reasonable care for their own and others' health and safety.
Question 17: What consultation requirements exist for WHS Legislation for EWPs under WHS law?
- Only senior workers are consulted
- None — management decides alone
- Workers must be consulted on matters affecting their health and safety, with genuine opportunity to provide input (Correct answer)
- Consultation is voluntary
Correct answer: Workers must be consulted on matters affecting their health and safety, with genuine opportunity to provide input
WHS law requires genuine consultation with workers on matters affecting their safety, including through HSRs and committees.
Question 18: What is a Code of Practice relevant to EWP Types and Categories?
- A marketing document
- A company internal policy
- A voluntary suggestion only
- A practical guide approved under WHS legislation that can be used as evidence of what is reasonably practicable (Correct answer)
Correct answer: A practical guide approved under WHS legislation that can be used as evidence of what is reasonably practicable
Codes of Practice provide practical guidance with legal significance — they can be cited as evidence of what is known and reasonably practicable.
Question 19: What documentation must be maintained for Emergency Lowering Procedures activities?
- Risk assessments, training records, incident reports, and inspection logs as required by WHS Regulations (Correct answer)
- A brief email
- No documentation needed
- Only financial records
Correct answer: Risk assessments, training records, incident reports, and inspection logs as required by WHS Regulations
WHS Regulations require maintaining various records for compliance, auditing, and incident investigation purposes.
Question 20: What is the purpose of monitoring and reviewing Load Limits and Capacities controls?
- To keep workers busy
- To verify controls remain effective, identify new hazards, and drive continuous improvement (Correct answer)
- To create busywork
- To justify the safety budget
Correct answer: To verify controls remain effective, identify new hazards, and drive continuous improvement
Monitoring and review ensures controls continue to work as intended and identifies any emerging hazards or improvement opportunities.
Question 21: What is the hierarchy of controls for managing Harness and Restraint Systems risks?
- No hierarchy exists
- Administrative controls only
- Elimination, substitution, isolation, engineering, administrative, PPE — most to least effective (Correct answer)
- PPE first, then other controls
Correct answer: Elimination, substitution, isolation, engineering, administrative, PPE — most to least effective
The hierarchy ranks controls from most effective (elimination) to least effective (PPE), guiding risk control decisions.
Question 22: What must a Safe Operating Procedures safety induction cover?
- Where to park
- Specific hazards, safe work procedures, emergency arrangements, PPE requirements, and reporting procedures (Correct answer)
- Company history only
- The company's financial performance
Correct answer: Specific hazards, safe work procedures, emergency arrangements, PPE requirements, and reporting procedures
Inductions must cover all information needed for workers to perform the activity safely.
Question 23: In Australian Australian EWP operations, what is the primary purpose of Overhead Hazard Identification procedures?
- To increase paperwork
- To satisfy insurance companies
- To protect worker health and safety through systematic hazard management (Correct answer)
- To slow down operations
Correct answer: To protect worker health and safety through systematic hazard management
Overhead Hazard Identification procedures are fundamental to protecting workers under Australian Australian EWP operations regulations.
Question 24: What record retention period applies to Rescue Procedures documents under WHS Regulations?
- No retention required
- Until the end of the project
- 1 month
- Typically 5 years, or 30 years for health monitoring and asbestos records (Correct answer)
Correct answer: Typically 5 years, or 30 years for health monitoring and asbestos records
Most WHS records must be kept for 5 years, with longer periods for specific records such as health monitoring (30 years) and asbestos.
Question 25: What is the PCBU's obligation for worker training in Pre-Operational Inspections?
- To provide a manual only
- No obligation exists
- To provide information, training, instruction, and supervision adequate for the worker to perform the task safely (Correct answer)
- To tell workers to be careful
Correct answer: To provide information, training, instruction, and supervision adequate for the worker to perform the task safely
The PCBU must ensure workers receive adequate information, training, instruction, and supervision appropriate to the nature of the work and risks.
Question 26: Under Australian law, what rights do workers have regarding Emergency Lowering Procedures safety?
- Rights depend on seniority
- Rights to information, training, consultation, representation through HSRs, and to cease unsafe work (Correct answer)
- No specific rights
- Only the right to complain
Correct answer: Rights to information, training, consultation, representation through HSRs, and to cease unsafe work
Workers have specific legal rights under WHS legislation including information, training, consultation, representation, and refusal of unsafe work.
Question 27: What consultation requirements exist for Pre-Operational Inspections under WHS law?
- Only senior workers are consulted
- Consultation is voluntary
- Workers must be consulted on matters affecting their health and safety, with genuine opportunity to provide input (Correct answer)
- None — management decides alone
Correct answer: Workers must be consulted on matters affecting their health and safety, with genuine opportunity to provide input
WHS law requires genuine consultation with workers on matters affecting their safety, including through HSRs and committees.
Question 28: What must a Ground Conditions Assessment procedure include to be effective?
- Only a signature page
- A brief paragraph
- A company letterhead only
- Clear steps, responsibilities, hazard controls, PPE requirements, emergency procedures, and review dates (Correct answer)
Correct answer: Clear steps, responsibilities, hazard controls, PPE requirements, emergency procedures, and review dates
Effective procedures must be comprehensive, clear, practical, and include all information needed for safe work.
Question 29: What is the significance of safety data sheets (SDS) for Pre-Operational Inspections?
- They only list ingredients
- SDSs provide critical safety information including hazards, handling precautions, first aid, and emergency procedures (Correct answer)
- They are marketing materials
- They are optional reading
Correct answer: SDSs provide critical safety information including hazards, handling precautions, first aid, and emergency procedures
SDSs contain essential information about hazardous substances needed for safe handling, storage, and emergency response.
Question 30: What supervisory requirements exist for Pre-Operational Inspections activities?
- Supervision is optional
- Adequate supervision by competent persons, proportionate to the level of risk (Correct answer)
- Only new workers need supervision
- No supervision needed
Correct answer: Adequate supervision by competent persons, proportionate to the level of risk
The level of supervision must be proportionate to the risk level, with competent supervisors overseeing the work.
EWP Licence – Elevated Work Platform (TLILIC0005)
The Australian EWP Licence assessment (TLILIC0005) tests knowledge required to safely operate a boom-type elevated work platform of 11 metres or more, covering legislation, hazard identification, pre-operational checks, safe operating procedures, harness systems, and emergency response.
Exam Rules
- You can skip questions and return to them later
- Flag questions for review before submitting
- No feedback shown until you submit the entire exam
- Unanswered questions count as wrong — answer everything
- 10 pretest questions are mixed in and don't affect your score
- Timer auto-submits when time runs out
- Your progress is auto-saved every 30 seconds