Troubleshooting & Problem Solving Flashcards
7 cards from real EPA 608 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Troubleshooting & Problem Solving flashcards as text
A technician sees a steady rise in vacuum gauge reading during a standing vacuum test that then levels off at a fixed pressure. What does this most likely indicate?
Answer: Moisture boiling off in the system
A rise that stabilizes below atmospheric pressure indicates moisture vaporizing, while a continuous rise indicates a leak.
Which method is generally the most sensitive way to pinpoint a very small refrigerant leak on an accessible joint?
Answer: Electronic leak detector
Electronic detectors can detect leaks as small as a fraction of an ounce per year, far more sensitive than bubbles or sound.
Oil staining around a flare fitting on a refrigeration line most commonly indicates what?
Answer: A refrigerant leak carrying oil out
Refrigerant carries oil with it as it escapes, leaving oily residue at the leak point.
Why must a technician never pressurize a system with oxygen or compressed shop air when leak testing?
Answer: Oxygen and oil can cause an explosion or fire, and air adds moisture
Oxygen with oil under pressure is explosive and compressed air introduces moisture; dry nitrogen is the proper choice.
An electronic leak detector alarms constantly in a mechanical room. What is the best first step?
Answer: Ventilate the area and move to a clean-air location to zero the detector
Background refrigerant must be cleared and the detector re-zeroed in clean air before it can locate a specific leak.
Under EPA leak repair rules, an owner of a commercial refrigeration appliance with 50 or more pounds of ODS refrigerant that exceeds its leak rate trigger must generally repair the leak within how many days?
Answer: 30 days
Leaks above the trigger rate generally must be repaired within 30 days of discovery.
Ultraviolet leak detection dye is best described as which of the following?
Answer: A dye added to the system that fluoresces under UV light at the leak point
UV dye circulates with the oil and glows under a UV lamp where it escapes.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy