Tools & Equipment Operation Flashcards
7 cards from real EPA 608 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Tools & Equipment Operation flashcards as text
During a standing vacuum test, the vacuum rises and then levels off. This most likely indicates:
Answer: Moisture in the system
A rise that stalls suggests boiling moisture, whereas a steady rise to atmosphere signals a leak.
Which refrigerant can NOT be detected by a halide torch?
Answer: R-134a
Halide torches detect chlorine; HFC-134a contains none.
What is the recommended gas for pressure testing a system for leaks?
Answer: Dry nitrogen with a regulator
Dry nitrogen is inert and, with a regulator, controls test pressure safely.
Why must oxygen or compressed air never be used to pressurize a system?
Answer: It can cause an explosive reaction with compressor oil
Oxygen or air with oil under pressure can ignite or explode.
When using an electronic leak detector, where should the probe be moved?
Answer: Slowly, below the joints and lines
Refrigerant is heavier than air, so probe slowly below fittings and lines.
What happens at a leak when soap bubble solution is applied?
Answer: Bubbles form or grow at the leak
Escaping gas forms bubbles in the solution at the leak point.
Why change vacuum pump oil frequently?
Answer: Contaminated oil prevents reaching a deep vacuum
Moisture-laden oil holds vapor and limits the vacuum the pump can reach.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy