Materials & Specifications Flashcards
7 cards from real EPA 608 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Materials & Specifications flashcards as text
Which gas is recommended for pressure testing a refrigeration system for leaks?
Answer: Dry nitrogen
Dry nitrogen is inert and safe; oxygen or air with oil can cause explosions.
What device must be used when pressurizing a system with nitrogen from a cylinder?
Answer: A pressure regulator
A regulator prevents dangerously high cylinder pressure from entering the system.
Which tubing is standard for air-conditioning and refrigeration piping?
Answer: ACR copper tubing
ACR copper tubing is cleaned, dehydrated and capped for refrigeration use.
Why is nitrogen flowed through tubing during brazing?
Answer: To prevent oxide scale formation inside the tube
A nitrogen purge keeps oxidation scale from forming and contaminating the system.
Which material should not be used in ammonia (R-717) systems?
Answer: Copper and brass
Ammonia attacks copper and copper alloys, so steel is used instead.
Which refrigerant has the highest operating pressure of these?
Answer: R-410A
R-410A operates at roughly 50-60% higher pressure than R-22.
Why must gauges and hoses used with R-410A be rated for higher pressure?
Answer: Its operating pressures are significantly higher than R-22
R-410A systems run at much higher pressure, so equipment must be rated accordingly.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy