Materials & Specifications Flashcards
7 cards from real EPA 608 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Materials & Specifications flashcards as text
Which type of lubricant is typically used with R-134a and other HFC refrigerants?
Answer: Polyolester (POE)
POE oils are miscible with HFCs, which mineral oil is not.
Why must POE oil containers be kept tightly capped?
Answer: It is highly hygroscopic and absorbs moisture
POE readily absorbs moisture from the air, which can cause acid formation and system damage.
Which oil was traditionally used with R-12 and R-22 systems?
Answer: Mineral oil
CFC and HCFC systems traditionally used mineral oil.
Which desiccant types are commonly used in refrigerant filter-driers?
Answer: Molecular sieve, activated alumina, and silica gel
Filter-drier cores use molecular sieve, activated alumina, or silica gel to remove moisture and acid.
What is the main problem caused by moisture in a refrigeration system?
Answer: Acid formation and freeze-up at the metering device
Moisture forms acids with refrigerant and can freeze at the metering device.
Which refrigerant is commonly identified by a light green cylinder?
Answer: R-22
R-22 cylinders are light green.
An oil that is 'miscible' with a refrigerant means it:
Answer: Mixes with the refrigerant and returns to the compressor
Miscible oils mix with refrigerant so they can be carried back to the compressor.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy