Maintenance & Repair Procedures Flashcards
7 cards from real EPA 608 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Maintenance & Repair Procedures flashcards as text
What is the main purpose of a triple evacuation procedure?
Answer: To remove moisture and noncondensables from the system
Repeated evacuation with nitrogen breaks the vacuum and removes moisture and noncondensable gases.
During a micron gauge decay test, the reading rises and then levels off at a steady value. What does this most likely indicate?
Answer: Moisture still in the system
A rise that stabilizes indicates moisture boiling off, while a continuous rise indicates a leak.
What is the maximum fill level for a refrigerant recovery cylinder?
Answer: 80 percent by weight
Cylinders must not be filled past 80 percent so there is room for liquid expansion.
To what level must a low-pressure appliance, such as one using R-123, be evacuated with recovery equipment made after 1993?
Answer: 25 mm Hg absolute
Low-pressure appliances must be recovered to 25 mm Hg absolute with newer equipment.
What is the standard color scheme of a refrigerant recovery cylinder?
Answer: Gray body with yellow top
Recovery cylinders are painted gray with a yellow top.
Which method is commonly used to speed up liquid recovery on a system with a large refrigerant charge?
Answer: Push-pull method
The push-pull method moves liquid refrigerant using pressure differential and is much faster for large charges.
How does cooling the recovery cylinder help during recovery?
Answer: It lowers cylinder pressure, which pulls vapor in faster
A cooler cylinder has lower internal pressure, increasing the pressure difference that drives recovery.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy