Installation & Assembly Techniques Flashcards
7 cards from real EPA 608 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Installation & Assembly Techniques flashcards as text
Which instrument is used to measure a deep vacuum during evacuation?
Answer: Electronic micron gauge
Standard gauges cannot read deep vacuum accurately, so a micron gauge is required.
A commonly accepted target vacuum before charging a system is about:
Answer: 500 microns
Evacuating to about 500 microns indicates moisture and non-condensables have been removed.
After isolating the pump, the vacuum rises and then levels off. What does this indicate?
Answer: Moisture still in the system
A rise that stabilizes suggests remaining moisture vaporizing, while a continuous rise suggests a leak.
Why should the system compressor never be used to pull the vacuum?
Answer: It can be damaged by arcing and overheating
Running a hermetic compressor in a vacuum can cause electrical arcing at the motor terminals and damage.
What is a benefit of using large-diameter hoses and removing valve cores during evacuation?
Answer: It speeds up evacuation by reducing flow restriction
Less restriction allows faster, more complete evacuation.
A triple evacuation is most useful when:
Answer: A system is heavily contaminated with moisture
Breaking the vacuum with dry nitrogen between pulls helps sweep out stubborn moisture.
Why is vacuum pump oil changed frequently?
Answer: Contaminated oil prevents the pump from reaching a deep vacuum
Moisture-laden oil raises the pump's ultimate vacuum limit and slows evacuation.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy