Inspection & Quality Control Flashcards
7 cards from real EPA 608 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Inspection & Quality Control flashcards as text
How often must refrigerant cylinders be hydrostatically tested to remain in transport service under DOT rules (typical DOT-39 recovery cylinders excluded)?
Answer: Every 5 years
Most DOT 4BA/4BW refillable cylinders require retest every five years.
To what maximum percentage of its capacity by weight may a recovery cylinder be filled?
Answer: 80 percent
The 80 percent fill limit leaves room for liquid expansion.
What is the main purpose of using a scale or float switch when filling a recovery cylinder?
Answer: To prevent overfilling
Weight monitoring or a float switch prevents overfilling and potential hydrostatic rupture.
A recovery cylinder is found to have a missing or illegible test date. What should the technician do?
Answer: Not use it for refrigerant until it is requalified
Cylinders without valid test dates must not be used until properly retested.
What color combination do EPA-compliant recovery cylinders have for refrigerant?
Answer: Gray body with yellow top
Recovery cylinders are gray with a yellow top shoulder.
A technician notices rust and a dent on a refrigerant cylinder. What is the correct action?
Answer: Remove it from service pending inspection
Damaged or heavily corroded cylinders must be taken out of service.
Which valve feature on a recovery cylinder prevents the cylinder from being overpressurized by a relief device?
Answer: Pressure relief valve
Relief valves vent excess pressure to protect the cylinder.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy