Continuous Improvement & Innovation Flashcards
7 cards from real EPA 608 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Continuous Improvement & Innovation flashcards as text
What is the maximum fill of a recovery cylinder by weight?
Answer: 80%
Cylinders must not exceed 80% full by weight to leave room for liquid expansion.
What are the standard colors of a DOT recovery cylinder for refrigerant?
Answer: Gray body with yellow top
Recovery cylinders are gray with a yellow top, distinguishing them from virgin refrigerant cylinders.
The push-pull method is used mainly to do what?
Answer: Recover large amounts of liquid refrigerant faster
Push-pull uses a pressure difference to transfer liquid quickly from large systems.
Recovery equipment must be certified to which standard under Section 608?
Answer: AHRI 740
EPA requires recovery and recycling equipment to be certified to AHRI 740.
How often must a DOT recovery cylinder be hydrostatically tested?
Answer: Every 5 years
DOT rules require a hydrostatic test date stamp within the past 5 years.
System-dependent recovery equipment may be used on appliances containing how much refrigerant?
Answer: 15 lb or less
System-dependent equipment relies on the appliance's own compressor and is limited to 15 lb or less.
Which practice best prevents cross-contamination when recovering different refrigerants?
Answer: Dedicating cylinders per refrigerant and purging hoses
Dedicated, labeled cylinders and purged hoses keep refrigerants from mixing.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy