Continuous Improvement & Innovation Flashcards
7 cards from real EPA 608 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Continuous Improvement & Innovation flashcards as text
Which gas is recommended, with a regulator, for pressure testing a refrigeration system for leaks?
Answer: Dry nitrogen
Dry nitrogen is inert and moisture-free, so it is safe for pressure testing when used with a regulator.
Why must oxygen never be used to pressure test a refrigeration system?
Answer: It can react violently with compressor oil and cause an explosion
Oxygen mixed with oil under pressure can ignite or explode.
A technician's halide torch will not detect a leak of R-410A. What is the most likely reason?
Answer: R-410A contains no chlorine
Halide torches react to chlorine, and HFC refrigerants such as R-410A contain none.
What is the purpose of adding UV dye to a system during leak-detection improvement efforts?
Answer: To make leak sites glow under an ultraviolet lamp
The dye escapes with oil at leak points and fluoresces under UV light.
During a standing vacuum test, the micron gauge rises quickly and then levels off. What does this typically indicate?
Answer: Moisture or trapped contaminants boiling off
A rise that plateaus suggests moisture vaporizing, while a continuous rise toward atmospheric indicates a leak.
Which simple practice most reduces leaks at service ports after maintenance?
Answer: Installing sealing caps with gaskets and checking Schrader cores
Sealed caps and good valve cores provide a secondary seal against slow leaks.
Refrigerant lines are rubbing against a metal bracket and wearing thin. What is the best long-term corrective action?
Answer: Add proper line supports and vibration isolation
Securing and isolating lines prevents abrasion that eventually causes leaks.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy