Code Compliance & Standards Flashcards
7 cards from real EPA 608 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Code Compliance & Standards flashcards as text
AHRI Standard 740 establishes requirements for which of the following?
Answer: Performance of recovery and recycling equipment
AHRI 740 covers the performance of refrigerant recovery, recycling, and reclaim equipment.
Under ASHRAE Standard 34, which safety class describes a refrigerant with low toxicity and no flame propagation?
Answer: A1
Class A1 refrigerants such as R-22 and R-410A have lower toxicity and show no flame propagation.
What evacuation level applies to a low-pressure appliance when using recovery equipment manufactured after November 15, 1993?
Answer: 25 mm Hg absolute
EPA requires evacuation of low-pressure appliances to 25 mm Hg absolute.
What is the maximum fill level for a refillable recovery cylinder?
Answer: 80% by weight
Cylinders may be filled to no more than 80% of capacity by weight to leave room for liquid expansion.
How often must a DOT-approved refillable recovery cylinder be hydrostatically tested?
Answer: Every 5 years
Refillable cylinders must be hydrostatically tested and requalified every 5 years.
At what pressure does the rupture disc on a low-pressure chiller typically relieve?
Answer: 15 psig
Low-pressure chillers use rupture discs rated at 15 psig to protect the shell.
For a small appliance with a working compressor, what recovery efficiency must a self-contained recovery device achieve?
Answer: 90% of the charge
Self-contained equipment must recover 90% of the charge when the compressor works, or 80% when it does not.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy