Blueprint Reading & Interpretation Flashcards
7 cards from real EPA 608 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Blueprint Reading & Interpretation flashcards as text
Why should you read the refrigerant type on the nameplate or drawings before recovering refrigerant?
Answer: To choose a correctly rated and labeled recovery cylinder and avoid mixing refrigerants
Knowing the refrigerant lets you use the proper recovery equipment and cylinder and avoid cross-contaminating refrigerants.
On a piping diagram, a service valve symbol on the system shows what?
Answer: A point where gauges or recovery hoses can be connected
Service valves are access points for gauges, charging, evacuation, and recovery.
A valve tagged "NC" on a piping diagram is what?
Answer: Normally closed
NC means normally closed, the valve's position when it is de-energized or at rest.
A tubing label of "7/8 in. OD" on a refrigerant line refers to what?
Answer: Outside diameter of the copper tube
Refrigeration copper tubing is sized by its outside diameter, so 7/8 OD means the outside measures 7/8 inch.
Where is a filter-drier normally shown on a piping diagram?
Answer: In the liquid line ahead of the metering device
The filter-drier is installed in the liquid line to remove moisture and debris before the metering device.
A king valve shown at the receiver outlet is used for what?
Answer: Isolating the receiver's refrigerant from the rest of the liquid line, such as during pump-down
The king valve isolates the receiver so refrigerant can be pumped down and stored for service.
A technician finds that the installed piping differs from the drawing. What is the best practice?
Answer: Verify the actual layout, work from what is installed, and note the discrepancy for correction of the drawing
Drawings may not match as-built conditions, so verify the real system and flag the difference for redlining.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy