Blueprint Reading & Interpretation Flashcards
7 cards from real EPA 608 practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Blueprint Reading & Interpretation flashcards as text
In a ladder diagram, what do the two vertical rails represent?
Answer: The power supply lines, such as L1 and L2
The vertical rails are the power source, and each horizontal rung is a separate circuit connected between them.
In what state are normally open contacts drawn on a schematic?
Answer: De-energized, with no power applied
Contacts are drawn in their de-energized, shelf state, so normally open contacts appear open.
How does a schematic diagram differ from a wiring (connection) diagram?
Answer: A schematic shows circuit logic, while a wiring diagram shows physical component locations
Schematics show how the circuit operates, while wiring diagrams show where components and terminals physically sit.
On a single-phase compressor wiring diagram, what do the terminal letters C, S, and R stand for?
Answer: Common, Start, Run
C is common, S is start winding, and R is run winding on a single-phase compressor.
On a wiring diagram legend, the abbreviation "BK" normally designates which wire color?
Answer: Black
BK is the common abbreviation for black, while blue is BL and brown is BR.
A run capacitor on an electrical diagram is rated in which unit?
Answer: Microfarads (µF or MFD)
Capacitance is measured in microfarads, shown as µF or MFD on diagrams and capacitor labels.
On a control schematic, where is a high-pressure cutout usually drawn relative to the contactor coil?
Answer: In series with the contactor coil
A high-pressure switch sits in series with the contactor coil so that opening it de-energizes the coil and stops the compressor.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy