EPA 608 Cheat Sheet 2026
The 30 highest-yield EPA 608 facts, distilled from real exam questions. Print it, save it as a PDF, or study it here โ free, no sign-up.
100 questions
120 min time limit
70.00% to pass
- What documentation must a EPA 608 professional maintain when performing installations? โ Installation records including specifications, materials used, and quality verification
- Why should a technician use large-diameter, short hoses when evacuating a system? โ They reduce flow restriction and speed up evacuation
- In EPA Section 608 Certification, what is the purpose of preventive maintenance schedules? โ To identify and address potential issues before they cause equipment failure
- What is the correct procedure for reading technical blueprints in EPA Section 608 Certification? โ Review the title block, scale, legend, and all notes before interpreting details
- What is the required recovery level for a low-pressure chiller containing R-123 using recovery equipment made after 1993? โ 25 mm Hg absolute
- Which certification type allows work on all appliance categories under Section 608? โ Universal
- Under Section 608 sales restrictions, who may legally purchase ozone-depleting refrigerant in containers larger than 2 lbs? โ A certified technician
- In EPA Section 608 Certification practice, what is the recommended hierarchy for controlling workplace hazards? โ Elimination, substitution, engineering controls, administrative controls, PPE
- Maximum civil penalty exposure for Clean Air Act violations is described per: โ Day, per violation
- Which quality management tool is used to identify the most significant factors in a dataset? โ Pareto chart (80/20 rule)
- A person disposing of a small appliance with refrigerant still inside, such as a scrap recycler, must do which of the following? โ Verify recovery or get a signed statement from the last owner
- A technician serving an appliance containing HCFC-22 must have which minimum certification for a high-pressure system? โ Type II
- What do DOT 4BA and 4BW designations on a cylinder indicate? โ Refillable cylinders
- What is the maximum fill level for a recovery cylinder? โ 80% by weight
- The ODS leak repair requirements apply to appliances containing how much refrigerant charge? โ 50 pounds or more
- An owner can seek an extension on leak repair if what condition exists? โ Parts or industry shutdown prevents timely repair
- What is a Schrader valve core removal tool used for? โ Removing cores without losing refrigerant to speed evacuation and recovery
- What is the maximum fill level for a refrigerant recovery cylinder? โ 80 percent by weight
- What must be done after repairing a leak in a covered appliance? โ Verification tests of the repair
- Why should a recovery cylinder never be overfilled with liquid refrigerant? โ Hydrostatic expansion can rupture the cylinder
- Does Section 608 technician certification expire? โ No, it does not expire
- How often must a DOT recovery cylinder be hydrostatically tested? โ Every 5 years
- When must an initial verification test of a leak repair be performed? โ Before the repaired system is recharged and returned to normal operation
- When recovering from a small appliance (Type I) with an operating compressor, what percentage of refrigerant must recovery equipment capture? โ 90%
- Refrigerant reclaimers must be certified by which entity? โ EPA
- In EPA Section 608 Certification practice, what should be done BEFORE operating any equipment? โ Perform a pre-operation safety inspection and verify all components are functioning
- Why is providing regular feedback important for team performance? โ It helps team members understand expectations and improve their performance
- When leak testing a low-pressure chiller, what should be done to raise internal pressure? โ Circulate controlled hot water to reach about 10 psig
- How often must DOT refillable refrigerant cylinders typically be hydrostatically tested? โ Every 5 years
- A technician finds a refrigeration system with a large leak. Which action best follows good practice before adding refrigerant? โ Find and repair the leak first
Turn these facts into recall:
What Practice Test Geeks adds beyond an AI chat for EPA 608
An AI chatbot can quiz you, but it can't reproduce the exam conditions or keep your record. Here you get:
- A timed, full-length EPA 608 mock exam โ 100 questions in 120 minutes with a 70% pass mark, modeled on the official exam's question count and time limit, followed by a score report broken down by exam domain.
- A fixed EPA 608 question bank: the same test every attempt, so your score is comparable from one try to the next instead of changing with every regenerated quiz.
- Progress saved on your device: completed tests, scores and missed questions stay in My Progress, so you can retake only what you got wrong.
- EPA 608 flashcards built from the same question bank.
- Free EPA 608 practice tests with the correct answer shown after each question.
Was this helpful?
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy