← All ELDT Flashcard Decks

MCQ Flashcards

11 cards from real ELDT practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 11 MCQ flashcards as text
  1. When you pull over at an accident scene, you ought not to:

    Answer: Any qualified person attending the accident and assisting the injured should be reported.

    When responding to an accident, the priority is to ensure safety, notify authorities, and provide assistance if qualified. Reporting any qualified person who is already attending and assisting the injured is not a required action; rather, the focus should be on the accident itself and the immediate needs. Drivers should secure the scene, call for help, and render aid only if they are trained and it is safe to do so.

  2. When descending a long, steep slope, which of the following DOES NOT determine your safe speed?

    Answer: Time of day

    Safe speed on a long, steep slope is determined by factors directly affecting vehicle control and braking, such as weather conditions, the grade's length and steepness, and the total weight of the vehicle and cargo. The time of day, however, does not inherently alter the physical forces acting on the vehicle or its braking capabilities. While visibility might change with time of day, it's not a direct determinant of the safe speed for the grade itself.

  3. When utilizing a curve, you ought to:

    Answer: choose a gear that will allow you to accelerate a little bit during the turn.

    When negotiating a curve, it's best to enter at a speed that allows for slight acceleration through the turn. This helps maintain vehicle stability and traction, as accelerating slightly shifts weight to the rear wheels, improving grip. Braking during a turn can cause a loss of traction, and maintaining the same speed or overdriving can lead to skidding or loss of control.

  4. What is meant by axle weight is:

    Answer: One axle's or one set of axles' weight delivered to the earth

    Axle weight refers to the total weight that is supported by a single axle or a group of axles and transferred to the road surface. This measurement is crucial for commercial vehicles to ensure compliance with legal weight limits and to prevent overloading, which can damage roads and compromise vehicle safety. It is distinct from tire capacity or the vehicle's total gross weight.

  5. When approaching a vehicle, bicyclist, or pedestrian, you should always presume that they:

    Answer: could suddenly move in front of you.

    Defensive driving principles dictate that drivers should always anticipate the unexpected from other road users. Assuming a vehicle, bicyclist, or pedestrian might suddenly move into your path allows you to be prepared to react safely. This proactive mindset helps prevent accidents by accounting for potential errors or unpredictable behavior from others.

  6. When operating a vehicle, be mindful of:

    Answer: All of the above.

    When operating a vehicle, it is crucial to be aware of all potential hazards and impaired drivers. Sleepy drivers, preoccupied individuals (e.g., distracted by phones), and drivers with obstructed vision (e.g., dirty windshields, overloaded vehicles) all pose significant risks on the road. Recognizing and anticipating these behaviors allows a driver to practice defensive driving and maintain a safe distance.

  7. When it first starts to rain, the road becomes quite Slippery. Why?

    Answer: Because the water mixes with oil left on the road by vehicles.

    When rain first begins, it mixes with oil, grease, and dirt that have accumulated on the road surface. This creates a slick, greasy film that significantly reduces tire traction, making the road extremely slippery. After prolonged rain, this film is often washed away, and traction can improve slightly, though wet roads always require caution.

  8. For front tires, the minimum tread depth in each major groove must be 4/32 inches, and for rear tires, it must be at least ___ inch.

    Answer: 2/32

    Federal regulations for commercial vehicles specify minimum tread depths to ensure adequate traction and prevent hydroplaning. Front tires, which are critical for steering, require a minimum of 4/32 inch tread depth. All other tires, including rear tires, must have at least 2/32 inch tread depth to be considered safe and legal.

  9. Which of the following claims regarding alcohol consumption is accurate?

    Answer: All of the above.

    All the statements are accurate regarding alcohol consumption and driving. BAC (Blood Alcohol Content) measures the amount of alcohol in your body. Alcohol impairs critical driving skills like judgment and self-control first. The only way to reduce BAC and sober up is by allowing time for the body to metabolize the alcohol, as coffee or other methods do not speed up this process.

  10. When a danger appears that calls for reducing your speed, you ought to:

    Answer: You can alert oncoming traffic by flashing your brake lights.

    When you need to reduce speed due to a hazard, flashing your brake lights is an effective way to warn drivers behind you. This action provides an early and clear signal of your intention to slow down, giving following drivers more time to react. Pointing or honking is less effective for this purpose, and accelerating or stopping abruptly can be dangerous.

  11. When a driver follows you too closely, you ought to:

    Answer: None of the above.

    When a driver is following too closely (tailgating), the safest action is to increase your following distance from the vehicle ahead of you. This creates a larger buffer zone, giving you more time and space to react if you need to slow down or stop, without forcing the tailgater to react abruptly. Activating flashers or pulling over might be necessary in extreme cases, but increasing your own following distance is the primary defensive measure.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. ecfr.gov — Passing score, registration deadline · verified Oct 2026
  2. fmcsa.dot.gov — Eligibility · verified Oct 2026