EIAT and NEIEP Test Study Guide 2026
Everything you need to pass the EIAT and NEIEP Test exam in one place: the exam format, every topic to study, real practice questions with explanations, flashcards, and full-length practice tests. Free, no sign-up needed.
EIAT and NEIEP Test exam key facts
- The Elevator Industry Aptitude Test (EIAT) assesses applicants on basic arithmetic, reading comprehension, mechanical comprehension, and general tool knowledge. Source
- The Elevator Industry Aptitude Test (EIAT) is scored on a pass/fail basis, with 70% correct being the minimum passing grade. Source
- The Elevator Industry Aptitude Test (EIAT) requires a $25.00 testing fee for each testing applicant. Source
- Applicants who fail the Elevator Industry Aptitude Test (EIAT) may re-apply during the next or a subsequent recruitment period. Source
- An applicant's rank on the hiring list following the Elevator Industry Aptitude Test (EIAT) and interview remains valid for two years, or until the recruitment list is exhausted. Source
📋 EIAT and NEIEP Test Exam Format at a Glance
📚 EIAT and NEIEP Test Topics to Study (41)
✍️ Sample EIAT and NEIEP Test Questions & Answers
1. What is the purpose of Personal Protective Equipment (PPE) on an electrical job site?
PPE such as gloves, hard hats, and safety glasses protects workers from electrical, physical, and environmental hazards.
2. What does 'RTI' stand for in apprenticeship training?
RTI (Related Technical Instruction) refers to the classroom-based learning component of an apprenticeship program, complementing on-the-job training.
3. Which of the following best describes a contactor as used in motor control?
A contactor is an electromagnetically actuated switch designed to repeatedly make and break motor load currents under the control of a low-power coil signal.
4. What type of electrical drawing shows the interconnection of components using standardized symbols without regard to physical location?
A schematic diagram uses standardized symbols to show electrical connections and functions without representing the physical layout.
5. A contractor purchases 12 boxes of connectors at $14.75 each and 8 boxes of wire nuts at $6.25 each. What is the total cost?
12 × $14.75 = $177 + 8 × $6.25 = $50; total = $227.00.
6. What does 'NTS' written on a drawing mean?
NTS (Not To Scale) is a notation indicating that the drawing dimensions cannot be measured proportionally from the printed drawing.
🎯 Free EIAT and NEIEP Test Practice Tests
📖 EIAT and NEIEP Test Guides & Articles
What Practice Test Geeks adds beyond an AI chat for EIAT and NEIEP Test
An AI chatbot can quiz you, but it can't reproduce the exam conditions or keep your record. Here you get:
- A timed, full-length EIAT and NEIEP Test mock exam — 100 questions in 90 minutes with a 70% pass mark, modeled on the official exam's question count and time limit, followed by a score report broken down by exam domain.
- A fixed EIAT and NEIEP Test question bank: the same test every attempt, so your score is comparable from one try to the next instead of changing with every regenerated quiz.
- Progress saved on your device: completed tests, scores and missed questions stay in My Progress, so you can retake only what you got wrong.
- A printable EIAT and NEIEP Test cheat sheet you can print or save as a PDF.
- EIAT and NEIEP Test flashcards built from the same question bank.
- Free EIAT and NEIEP Test practice tests with the correct answer shown after each question.
How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- neiep.org — Score validity, fees, passing score, retake policy, score release, eligibility, exam format, registration, test delivery · verified Oct 2026