Tools, Equipment and Installation Flashcards
6 cards from real EIAT and NEIEP Test practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Tools, Equipment and Installation flashcards as text
What type of fitting must be used when transitioning from rigid metal conduit (RMC) to flexible metal conduit (FMC) at a motor?
Answer: A liquidtight flexible connector or FMC connector
An FMC connector or liquidtight flexible connector is used at the termination point to properly secure the flexible conduit to a box or motor.
A clamp-on ammeter (clamp meter) measures current by:
Answer: Detecting the magnetic field produced by current flowing through a conductor
A clamp-on ammeter uses a current transformer built into the clamp jaws to sense the magnetic field around a conductor and convert it to an ampere reading.
Why must a circuit be de-energized and verified dead before using an ohmmeter on it?
Answer: Applied voltage from a live circuit will damage the meter and give false readings
An ohmmeter applies its own internal voltage; external voltage from a live circuit will destroy the meter and produce meaningless or dangerous results.
When installing EMT conduit, the maximum spacing between supports (straps) in a straight run is specified by:
Answer: NEC Article 358 based on conduit trade size
NEC Article 358 specifies that EMT must be supported within 3 feet of every box or fitting and at intervals not exceeding 10 feet for standard trade sizes.
What is the function of a phase rotation meter (phase sequence tester)?
Answer: Determines the sequence (A-B-C or A-C-B) in which phases reach their peak voltages
A phase rotation meter identifies whether a three-phase system rotates in the correct sequence (A-B-C), which is critical for motor direction and power quality.
When terminating conductors at a terminal strip or lug, which tool is used to ensure proper tightening torque?
Answer: Calibrated torque screwdriver or torque wrench
A calibrated torque screwdriver or torque wrench applies the exact torque specified by the manufacturer to ensure a secure, reliable electrical connection.
How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- neiep.org — Score validity, fees, passing score, retake policy, score release, eligibility, exam format, registration, test delivery · verified Oct 2026