EIAT and NEIEP Test FREE EIAT and NEIEP Safety and Code Questions and Answers 1 — Questions and Answers
Question 1: What does OSHA stand for?
- Occupational Safety and Health Administration (Correct answer)
- Official Safety and Hazard Authority
- Occupational Standards and Hazard Association
- Office of Safety and Health Accreditation
Correct answer: Occupational Safety and Health Administration
OSHA — the Occupational Safety and Health Administration — is the federal agency responsible for setting and enforcing workplace safety standards.
Question 2: What is the minimum safe working distance from energized overhead power lines for unqualified workers?
- 10 feet (Correct answer)
- 3 feet
- 6 feet
- 5 feet
Correct answer: 10 feet
OSHA requires unqualified workers to stay at least 10 feet away from energized overhead power lines up to 50kV.
Question 3: What does 'lockout/tagout' (LOTO) protect workers from?
- Unexpected energization of equipment during maintenance (Correct answer)
- Electrical fires in panel boxes
- Overloading circuits
- Lightning strikes on job sites
Correct answer: Unexpected energization of equipment during maintenance
Lockout/tagout procedures ensure equipment is de-energized and cannot be accidentally restarted while workers perform maintenance.
Question 4: Which class of fire extinguisher is rated for electrical fires?
- Class C (Correct answer)
- Class A
- Class B
- Class D
Correct answer: Class C
Class C fire extinguishers use non-conductive agents suitable for electrical equipment fires, preventing shock to the user.
Question 5: What is the purpose of Personal Protective Equipment (PPE) on an electrical job site?
- To protect workers from injuries and hazards (Correct answer)
- To satisfy union requirements only
- To identify workers by trade
- To comply with insurance policies
Correct answer: To protect workers from injuries and hazards
PPE such as gloves, hard hats, and safety glasses protects workers from electrical, physical, and environmental hazards.
Question 6: Before working on an electrical panel, what should an electrician always do first?
- De-energize and verify the circuit is dead with a meter (Correct answer)
- Put on rubber gloves
- Notify the supervisor
- Turn off all lights in the area
Correct answer: De-energize and verify the circuit is dead with a meter
The first step is always to de-energize the circuit and verify it is dead using a properly rated voltage tester before touching any conductors.
EIAT and NEIEP Test FREE EIAT and NEIEP Safety and Code Questions and Answers 1
What does OSHA stand for?