EETC - Equipment & Engine Training Council Cooling Systems and Thermal Management Questions and Answers Flashcards

What is the correct procedure when replacing a liquid-cooled engine thermostat?

Answer: Install with the temperature-sensing end facing the engine block

The thermostat's temperature-sensing element must face the engine block so it accurately reads coolant temperature exiting the engine before deciding to open.

On a liquid-cooled small engine, what does a radiator pressure cap primarily do?

Answer: Keeps the system sealed and raises the boiling point of coolant

A pressurized cooling system raises the coolant's boiling point, allowing the engine to run hotter without boiling over while the cap seals the system.

What is the recommended method for cleaning debris from air-cooled engine fins during maintenance?

Answer: Compressed air blown in the direction of normal airflow

Compressed air directed in the normal airflow direction effectively clears debris from fins without damaging the thin metal structures.

Which condition causes a liquid-cooled engine to run consistently cool and never reach operating temperature?

Answer: Thermostat stuck in the open position

A thermostat stuck open allows continuous coolant flow through the radiator, preventing the engine from building up heat to reach its operating temperature.

What ratio of antifreeze to water is typically recommended for year-round protection in most US climates?

Answer: 50% antifreeze / 50% water

A 50/50 mixture of antifreeze and water provides freeze protection to approximately -34°F and optimal heat transfer and corrosion protection for most US climates.

What causes a cooling fan shroud to be critical on an air-cooled engine?

Answer: It directs airflow over all cylinder fins evenly to prevent hot spots

The shroud channels and directs air from the flywheel fan uniformly over all cylinder and head fins, preventing localized overheating or hot spots.