← All EDT Flashcard Decks

Mixed Deck — All EDT Topics Flashcards

100 cards from real EDT practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 20 Mixed Deck — All EDT Topics flashcards as text
  1. Which part of the brain is responsible for coordinating movement and balance?

    Answer: Cerebellum

    The cerebellum, located at the back of the brain, is primarily responsible for coordinating voluntary movements, maintaining posture, balance, and motor learning. It integrates sensory input from the spinal cord with motor commands from the cerebral cortex to fine-tune movements.

  2. EDX evaluation of a meralgia paresthetica (lateral femoral cutaneous nerve entrapment) relies primarily on:

    Answer: Lateral femoral cutaneous nerve sensory NCS comparing symptomatic to asymptomatic side

    The lateral femoral cutaneous nerve is a pure sensory nerve; LFCN sensory NCS comparing sides (amplitude and latency) is the primary EDX test for meralgia paresthetica.

  3. In a patient with peroneal nerve palsy at the fibular head, needle EMG of which muscle would help differentiate it from L5 radiculopathy?

    Answer: Short head of the biceps femoris

    The short head of the biceps femoris is innervated by the peroneal division of the sciatic nerve above the fibular head; denervation there indicates a more proximal sciatic or L5 lesion, not isolated fibular head palsy.

  4. Fibrillation potentials on needle EMG represent:

    Answer: Spontaneous discharge of individual denervated muscle fibers

    Fibrillation potentials represent spontaneous discharges of single denervated muscle fibers that have become hyperexcitable after losing their nerve supply.

  5. Which NCS finding is characteristic of carpal tunnel syndrome?

    Answer: Prolonged median sensory peak latency across the wrist

    Carpal tunnel syndrome characteristically shows prolonged median sensory peak latency across the wrist due to focal demyelination at the carpal tunnel.

  6. EDX findings in radial nerve palsy due to 'Saturday night palsy' (compression at the spiral groove) typically show:

    Answer: Conduction block or axonal loss across the spiral groove sparing radial muscles proximal to the groove

    Spiral groove compression spares proximal radial muscles (triceps, brachioradialis partially) while affecting wrist and finger extensors, with conduction block localized across the groove.

  7. The primary purpose of the reference electrode in a monopolar needle EMG recording is:

    Answer: To provide an electrically neutral reference point so the differential amplifier records only local muscle activity

    The reference electrode provides a neutral potential for the differential amplifier; the active needle minus the reference captures local muscle electrical activity while rejecting common-mode noise.

  8. Complex repetitive discharges (CRDs) on EMG are best described as:

    Answer: Uniform repetitive discharges with abrupt onset and cessation, indicating chronic muscle denervation or myopathy

    CRDs are uniform repetitive discharges with machine-gun-like quality that start and stop abruptly; they indicate chronicity in either neurogenic or myopathic conditions.

  9. In a patient with suspected thoracic outlet syndrome (neurogenic type), which NCS finding is most characteristic?

    Answer: Reduced medial antebrachial cutaneous SNAP amplitude

    Neurogenic TOS characteristically shows reduced medial antebrachial cutaneous SNAP amplitude due to compression of the lower trunk/medial cord of the brachial plexus.

  10. Needle gauge selection for EMG affects recordings because smaller gauge needles:

    Answer: Record from a smaller territory, are less painful, but may have higher impedance

    Smaller gauge needles have a smaller recording territory (reduced uptake area), causing less patient discomfort but potentially higher impedance and smaller recorded MUP amplitudes.

  11. Which setting determines the frequency range of detected signals?

    Answer: Filter

    The filter setting on an EDX machine is crucial because it determines the specific frequency range of electrical signals that will be detected and displayed. By setting appropriate high-pass and low-pass filters, technicians can eliminate unwanted noise and artifacts while preserving the relevant physiological signals from nerves and muscles. This ensures a clear and interpretable waveform for accurate diagnosis.

  12. When performing needle EMG of the first dorsal interosseous (FDI), the main clinical purpose is to evaluate:

    Answer: Ulnar nerve and/or C8/T1 roots

    The FDI is innervated by the ulnar nerve (deep branch) and reflects C8/T1 myotomal innervation, making it useful for evaluating ulnar nerve or C8/T1 pathology.

  13. In a pregnant patient with suspected carpal tunnel syndrome, EDX evaluation is considered:

    Answer: Generally safe with standard precautions, as NCS and EMG currents are localized to the extremity and do not reach the fetus

    Standard EDX studies in pregnant patients are considered safe because the stimulus currents are localized to the extremity and the very small currents used in NCS/EMG do not travel to the uterus.

  14. Which control adjusts the amplitude of the signal displayed on-screen?

    Answer: Gain

    The gain control on an EDX machine directly adjusts the amplification of the electrical signal received from the patient. By increasing the gain, smaller signals become larger and more visible on the screen, while decreasing it can prevent larger signals from saturating the display. This adjustment is critical for optimizing the visualization of nerve and muscle responses, ensuring they are clearly discernible for analysis.

  15. How should a technician position a patient for a lower limb NCS?

    Answer: Lying down with relaxed limbs

    For a lower limb Nerve Conduction Study (NCS), the patient should be positioned lying down with their limbs relaxed. This position minimizes muscle tension and movement artifacts, which can interfere with accurate signal acquisition. Relaxed muscles ensure that the electrical responses being measured are primarily from the nerves, leading to more reliable and interpretable results.

  16. What action ensures electrical safety during an EDX procedure?

    Answer: Use grounded equipment

    Using grounded equipment is a fundamental electrical safety measure during an EDX procedure. Grounding provides a safe path for stray electrical currents to dissipate, preventing electrical shocks to both the patient and the technician. This practice is crucial for minimizing electrical hazards and ensuring a secure testing environment.

  17. Why is supramaximal stimulation required for accurate nerve conduction studies?

    Answer: To ensure all axons in the nerve are activated, producing a maximal and reproducible evoked potential

    Supramaximal stimulation (typically 20–30% above the level that produces maximal response) ensures all axons are activated, making amplitude and velocity measurements reliable.

  18. Satellite potentials seen on needle EMG are:

    Answer: Late components of MUPs linked to the main potential, indicating reinnervation

    Satellite potentials are small late components time-locked to the main MUP, reflecting slow-conducting newly reinnervated muscle fibers linked to the same motor unit.

  19. The recommended stimulation rate for standard nerve conduction studies is:

    Answer: 1–3 Hz

    Stimulation at 1–3 Hz allows sufficient recovery time between stimuli to prevent rate-dependent changes in CMAP or SNAP amplitude.

  20. Which nerve is tested to evaluate C8/T1 radiculopathy using motor NCS?

    Answer: Ulnar nerve (ADM recording)

    The ulnar nerve recorded from the abductor digiti minimi (ADM) primarily reflects C8/T1 myotomal innervation and is most useful for evaluating C8/T1 radiculopathy.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. ptcny.com — Test delivery, fees, exam format, passing score, retake policy, score release, test dates, time limit, exam information · verified Nov 2026
  2. aaet.info — Renewal, score validity, eligibility · verified Nov 2026