Device Setup & Operation Flashcards
6 cards from real EDT practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Device Setup & Operation flashcards as text
What is the first step when setting up an EMG machine?
Answer: Verify grounding and power connections
The very first step when setting up any electrodiagnostic (EDX) equipment, including an EMG machine, is to verify proper grounding and power connections. This is a critical safety measure to protect both the patient and the technician from electrical hazards. Ensuring stable power also prevents artifacts and ensures the reliable operation of the sensitive equipment.
Which setting determines the frequency range of detected signals?
Answer: Filter
The filter setting on an EDX machine is crucial because it determines the specific frequency range of electrical signals that will be detected and displayed. By setting appropriate high-pass and low-pass filters, technicians can eliminate unwanted noise and artifacts while preserving the relevant physiological signals from nerves and muscles. This ensures a clear and interpretable waveform for accurate diagnosis.
Why is calibration of EDX equipment important?
Answer: Ensures diagnostic accuracy
Calibration of electrodiagnostic (EDX) equipment is a fundamental procedure that ensures the accuracy and reliability of the measurements. Regular calibration verifies that the machine is producing precise and consistent readings, which is essential for making correct diagnostic interpretations. Without proper calibration, results could be misleading, potentially leading to incorrect diagnoses or treatment plans.
Which control adjusts the amplitude of the signal displayed on-screen?
Answer: Gain
The gain control on an EDX machine directly adjusts the amplification of the electrical signal received from the patient. By increasing the gain, smaller signals become larger and more visible on the screen, while decreasing it can prevent larger signals from saturating the display. This adjustment is critical for optimizing the visualization of nerve and muscle responses, ensuring they are clearly discernible for analysis.
What is the function of the sweep speed setting?
Answer: Time axis adjustment
The sweep speed setting on an EDX machine controls the rate at which the waveform is displayed across the screen, essentially adjusting the time axis. A faster sweep speed compresses the waveform, showing more activity over a shorter period, while a slower sweep speed expands it, allowing for detailed examination of individual components. This adjustment is vital for visualizing the temporal characteristics of nerve and muscle potentials.
Why must electrode impedance be checked before testing?
Answer: To ensure clear and accurate signal acquisition
Checking electrode impedance before testing is critical because high impedance can significantly degrade the quality of the acquired electrical signals. Poor contact or high resistance at the electrode-skin interface introduces noise and reduces the amplitude of the physiological signals, making them difficult to interpret. Ensuring low impedance guarantees clear, accurate, and reliable signal acquisition, which is essential for diagnostic accuracy.
How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy