DPO Building Codes & Standards 2

Question 1

Which IMO document provides the primary guidelines for dynamic positioning systems on offshore vessels?

Accepted Answer

MSC/Circ.645

Answer

IMO MSC/Circ.645 'Guidelines for Vessels with Dynamic Positioning Systems' is the foundational IMO guidance document for DP systems.

Question 2

According to IMCA M 103, DP Equipment Class 2 requires that a single failure shall not result in:

Accepted Answer

Loss of position

Answer

IMCA M 103 defines DP Class 2 such that no single failure of an active component or system shall cause loss of position.

Question 3

The IMCA document M 190 addresses which aspect of DP operations?

Accepted Answer

Guidance on the use of FMEA

Answer

IMCA M 190 provides guidance on failure mode and effects analysis (FMEA) for DP systems.

Question 4

Under DNV class notation DYNPOS-AUTRO, which redundancy level is represented?

Accepted Answer

Equipment Class 3 with redundant systems plus fire/flood protection

Answer

DYNPOS-AUTRO corresponds to DP Equipment Class 3, requiring redundant systems protected against fire and flooding.

Question 5

Which standard defines the competence requirements for a Senior Dynamic Positioning Operator (DPO)?

Accepted Answer

IMCA C 002

Answer

IMCA C 002 specifies the training, certification, and competence framework for DP operators including Senior DPO requirements.

(DPO) Dynamic Positioning Operator Exam Practice Test