Practice Test Geeks(DPO) Dynamic Positioning Operator Exam Practice Test
← All DPO Flashcard Decks

Building Codes & Standards Flashcards

7 cards from real DPO practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Building Codes & Standards flashcards as text

  1. Which classification society notation is equivalent to DP Equipment Class 2 under Lloyd's Register rules?

    Answer: DP(AA)

    Lloyd's Register uses the notation DP(AA) for Class 2 equivalent, indicating redundancy in active components without fire/flood separation.

  2. According to the IMCA competence framework, a DPO logbook sea time must be verified by:

    Answer: The vessel's Master and DP instructor

    IMCA requires that sea time entries in the DPO logbook be countersigned by the Master and verified by an approved DP instructor.

  3. What does the term 'worst-case failure design intent' (WCFDI) refer to in DP FMEA standards?

    Answer: The single failure that results in the greatest loss of thrust or position keeping ability

    WCFDI identifies the single credible failure that would produce the most severe consequence to position keeping, used to define DP capability limits.

  4. Under SOLAS regulation II-1/3-8, DP vessels operating in DP Class 2 or 3 must have their DP systems:

    Answer: Tested and documented in an approved DP FMEA

    SOLAS II-1/3-8 requires that DP systems on Class 2 and 3 vessels be backed by an approved FMEA proving redundancy against single failures.

  5. The IMCA document M 220 covers which operational topic?

    Answer: Common marine inspection document (CMID) for DP vessels

    IMCA M 220 is the Common Marine Inspection Document used to standardize DP vessel inspection criteria across the offshore industry.

  6. According to IMCA M 166, what is the recommended minimum number of independent position reference systems for a DP Class 2 operation?

    Answer: Three

    IMCA M 166 recommends a minimum of three independent position reference systems for DP Class 2 operations to ensure reliable position data.

  7. The ABS 'Guidance Notes on the Application of Ergonomics to Marine Systems' is most directly relevant to DP operators because it addresses:

    Answer: Bridge console layout and alarm management for reducing operator error

    ABS ergonomics guidance directly affects DP bridge console design, alarm management philosophy, and display layouts to minimize human error.