DCW Physical Mobility and Transfer Assistance 2

Question 1

What is the primary purpose of maintaining proper body alignment when positioning a bedridden client?

Accepted Answer

To prevent complications such as pressure injuries, contractures, and circulatory problems

Answer

Proper body alignment prevents pressure injuries, contractures, respiratory compromise, and circulatory issues that develop when a bedridden client remains in one position.

Question 2

How often should a bedridden client typically be repositioned to prevent pressure injuries?

Accepted Answer

Every 2 hours

Answer

Standard care guidelines require repositioning bedridden clients every 2 hours to relieve sustained pressure on bony prominences and prevent skin breakdown.

Question 3

What is the primary use of a transfer board (slide board)?

Accepted Answer

To assist in moving a client from one surface to another at similar heights with minimal lifting

Answer

A transfer board bridges the gap between two surfaces, allowing the client to slide across with minimal lifting and reducing injury risk for both client and caregiver.

Question 4

When using a mechanical (Hoyer) lift to transfer a client, what is the recommended minimum number of staff members present?

Accepted Answer

Two staff members — one to operate the lift and one to guide and support the client

Answer

At least two staff should be present: one to operate the mechanical lift controls and one to guide, support, and monitor the client throughout the transfer.

Question 5

Before transferring a client into a wheelchair, what must the caregiver always check regarding the wheelchair?

Accepted Answer

Lock both wheelchair brakes so the chair cannot move

Answer

Locking both wheelchair brakes before the transfer prevents the chair from rolling away, which is a leading cause of transfer-related falls.

DCW - Direct Care Worker Practice Test

DCW - Direct Care Worker Practice Test

DCW Physical Mobility and Transfer Assistance 2