Practice Test GeeksCWI Practice Test
← All CWI Flashcard Decks

Codebook Navigation and Application Flashcards

7 cards from real CWI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Codebook Navigation and Application flashcards as text

  1. In AWS D1.1, which section contains the prequalified joint detail tables for complete joint penetration groove welds?

    Answer: Section 4

    Section 4 of AWS D1.1 covers prequalified WPS requirements including the joint detail tables for CJP groove welds.

  2. When AWS D1.1 lists a requirement as 'shall,' this indicates the requirement is:

    Answer: Mandatory

    In AWS codes, 'shall' denotes a mandatory requirement, whereas 'should' denotes a recommendation.

  3. Which AWS D1.1 table is used to determine the minimum preheat and interpass temperature for a given base metal and thickness?

    Answer: Table 4.5

    Table 4.5 in AWS D1.1 provides minimum preheat and interpass temperature requirements based on base metal category and thickness.

  4. A CWI needs to verify fillet weld size acceptance criteria. In AWS D1.1, where would this information be found?

    Answer: Section 6 — Inspection

    Section 6 (Inspection) contains the visual inspection acceptance criteria including fillet weld size tolerances.

  5. In AWS D1.1, Annex A is normative. What does 'normative' mean for an annex?

    Answer: It is mandatory and part of the code requirements

    A normative annex contains mandatory requirements just like the main body of the code, unlike informative annexes which are for guidance only.

  6. Which symbol in AWS D1.1 figures indicates that a dimension or variable is the same as shown in a referenced figure?

    Answer: A circle with a letter

    AWS D1.1 uses circled letters (callouts) to cross-reference dimensions between figures and corresponding tables.

  7. When performing a code search for the maximum allowable undercut in a statically loaded tension member per AWS D1.1, which section should the inspector consult first?

    Answer: Section 6 — Inspection

    Weld discontinuity acceptance criteria, including undercut limits, are located in Section 6 under visual inspection requirements.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. aws-p-001-delivery.sitecorecontenthub.cloud — Late registration, registration deadline, test dates, retake policy, exam information · verified Oct 2026
  2. aws.org — Time limit, fees, retake fee, test delivery, exam format, passing score, score release, score validity · verified Oct 2026