Practice Test GeeksCWI Practice Test
← All CWI Flashcard Decks

Code Book Application Flashcards

7 cards from real CWI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Code Book Application flashcards as text

  1. When AWS D1.1 requires a prequalified WPS, which condition would disqualify it from prequalified status?

    Answer: Exceeding the maximum interpass temperature for the process

    Exceeding the maximum interpass temperature specified in AWS D1.1 removes a WPS from prequalified status and requires qualification testing.

  2. Under AWS D1.1, what is the minimum preheat temperature required for ASTM A514 steel with thickness over 2½ inches when using SMAW?

    Answer: 200°F (95°C)

    AWS D1.1 Table 3.2 requires a minimum preheat of 200°F (95°C) for A514 steel over 2½ inches thick when welded with SMAW.

  3. In AWS D1.1, what does the term 'essential variable' mean in the context of a WPS?

    Answer: A variable that, if changed, requires re-qualification of the WPS

    An essential variable is one whose change beyond specified limits requires requalification of the welding procedure specification.

  4. Per AWS D1.1, a CJP groove weld in a T-joint subjected to tension perpendicular to its axis is classified as which joint category for inspection purposes?

    Answer: Category B

    AWS D1.1 classifies CJP groove welds in T-joints and corner joints as Category B for NDT purposes.

  5. When using AWS D1.1 Table 6.1 for visual inspection of groove welds, what is the maximum allowable undercut depth for a statically loaded member in tension?

    Answer: 1/16 inch (1.6 mm)

    AWS D1.1 Table 6.1 permits undercut not exceeding 1/16 inch (1.6 mm) for statically loaded members in tension.

  6. According to AWS D1.1, which of the following is NOT a required element of a Welding Procedure Specification (WPS)?

    Answer: Welder qualification test results

    Welder qualification test results are documented on a Welder Performance Qualification Record (WPQR/PQR), not on the WPS itself.

  7. Under AWS D1.1, a groove weld tested by a bend test fails if any single open discontinuity exceeds what maximum dimension?

    Answer: 1/8 inch (3.2 mm)

    AWS D1.1 requires bend test specimens to have no open discontinuity exceeding 1/8 inch (3.2 mm) in any direction.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. aws-p-001-delivery.sitecorecontenthub.cloud — Late registration, registration deadline, test dates, retake policy, exam information · verified Oct 2026
  2. aws.org — Time limit, fees, retake fee, test delivery, exam format, passing score, score release, score validity · verified Oct 2026