← All CTP Flashcard Decks

Mixed Deck — All CTP Topics Flashcards

100 cards from real CTP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 20 Mixed Deck — All CTP Topics flashcards as text
  1. Rail intermodal is usually most cost-competitive with over-the-road truckload at about what length of haul?

    Answer: More than about 500 miles

    Terminal and drayage costs are fixed, so intermodal usually beats truck only on longer hauls, often more than about 500 miles.

  2. Under current FMCSA rules, when must a property-carrying CMV driver submit a post-trip Driver Vehicle Inspection Report (DVIR)?

    Answer: Only when a defect or deficiency is found

    Since 2014, property-carrying drivers need to file a DVIR only if they discover a defect or deficiency.

  3. Landed cost of an imported product includes which combination?

    Answer: Product price, freight, insurance, duties, and handling fees

    Landed cost totals all costs to get a product to its destination, including transport, duties, and fees.

  4. The Emergency Response Guidebook (ERG) used by first responders at hazmat incidents is published by which agency?

    Answer: PHMSA

    PHMSA publishes the ERG, typically updated every four years.

  5. A single truck makes scheduled pickups from several suppliers on a fixed loop and delivers to one plant. This is known as a:

    Answer: Milk run

    A milk run consolidates pickups from multiple suppliers on a regular circuit.

  6. Which is one of the four causes of the bullwhip effect identified by Lee, Padmanabhan, and Whang?

    Answer: Demand signal processing

    The four causes are demand signal processing, order batching, price fluctuation, and rationing/shortage gaming.

  7. In a domestic sale with terms 'FOB Origin, Freight Collect,' who typically bears the risk of loss in transit?

    Answer: The buyer

    Under FOB Origin, title and risk transfer to the buyer when goods are tendered to the carrier at origin.

  8. Under Incoterms 2020 FCA (Free Carrier), risk transfers from seller to buyer when:

    Answer: Goods are delivered to the buyer's nominated carrier at the named place

    Under FCA, the seller delivers to the carrier nominated by the buyer at the named place, and risk passes at that point.

  9. Under OSHA 29 CFR 1910.178, how often must a powered industrial truck (forklift) operator's performance be evaluated?

    Answer: At least every 3 years

    Forklift operators need a performance evaluation at least every three years, plus refresher training after incidents or unsafe operation.

  10. How can a fleet manager improve fuel efficiency?

    Answer: Training drivers and route optimization

    Improving fuel efficiency is critical for cost savings and environmental impact in fleet operations. Driver training promotes eco-driving techniques like smooth acceleration, proper gear usage, and reduced idling, while route optimization software identifies the shortest and most efficient paths, minimizing mileage and time on the road. Both strategies significantly contribute to lower fuel consumption and operational costs.

  11. Federal regulations require that every commercial motor vehicle pass a periodic inspection at least how often?

    Answer: Every 12 months

    49 CFR 396.17 requires a periodic (annual) inspection of each CMV at least once every 12 months.

  12. Which risk analysis tool shows the causes (threats) of a single hazardous event on one side and its consequences on the other, with barriers in between?

    Answer: Bow-tie analysis

    A bow-tie diagram places preventive barriers on the threat side and mitigating barriers on the consequence side of a central top event.

  13. In a relay network, drivers swap trailers at midpoints and return home the same day. What is the main scheduling benefit?

    Answer: Continuous freight movement with drivers home daily

    Relays keep freight moving long distances while drivers stay within short regional loops.

  14. A dispatcher uses route optimization software for multi-stop delivery routes. Which classic problem is the software primarily solving?

    Answer: The vehicle routing problem (VRP)

    VRP algorithms find the least-cost set of routes serving all stops under constraints like capacity and time windows.

  15. A shipper accepts a lower freight rate in exchange for limiting the carrier's liability to a stated amount per pound. What is this called?

    Answer: Released value rate

    Released value rates limit carrier liability in return for a reduced rate, as permitted under Carmack when properly agreed.

  16. A third-party logistics provider (3PL) that also coordinates other 3PLs and carriers as a single integrator is often called what?

    Answer: Fourth-party logistics provider (4PL)

    A 4PL manages and integrates multiple logistics providers on the shipper's behalf.

  17. Which best describes the scope of Route Optimization & Scheduling?

    Answer: A comprehensive area covering both theoretical foundations and practical applications

    Route Optimization & Scheduling encompasses both theoretical foundations and practical applications essential to professional practice.

  18. Why are pre-trip inspections critical for drivers?

    Answer: To ensure vehicle safety and compliance

    Pre-trip inspections are critical for drivers because they are mandatory checks performed before starting a trip to ensure the vehicle is in safe operating condition. These inspections help identify potential mechanical defects or safety hazards, preventing breakdowns and accidents on the road. They also ensure compliance with federal regulations, protecting both the driver and other road users.

  19. What is a common risk factor in transportation operations?

    Answer: Driver fatigue

    Driver fatigue is a significant risk factor in transportation because it severely impairs a driver's judgment, reaction time, and alertness. This diminished capacity dramatically increases the likelihood of accidents, making it a critical safety concern that requires strict management and regulatory oversight to protect lives and property.

  20. What is the maximum gross vehicle weight generally allowed on the federal Interstate Highway System without a special permit?

    Answer: 80,000 pounds

    Federal law sets an 80,000-pound gross weight limit on Interstates, subject to axle and bridge formula limits.

Written and edited by , founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. nptc.org — Fees, registration deadline, renewal, score validity, test delivery, exam format, passing score, retake policy, time limit, exam information · verified Nov 2026