โ† All CTP Flashcard Decks

Technical Problem Solving Flashcards

7 cards from real CTP practice questions. Tap to flip, then mark Knew It or Still Learning โ€” missed cards come back until you master them.

Read the first 7 Technical Problem Solving flashcards as text
  1. Before performing a change that could cause data loss while troubleshooting, what should a technician do first?

    Answer: Verify a current backup exists

    Confirming a backup protects against irreversible data loss if the change fails.

  2. A computer powers on, fans spin, but there is no display and a series of beeps sounds. What is the best next step?

    Answer: Look up the beep code in the motherboard documentation

    POST beep codes identify specific hardware failures and are defined by the motherboard or BIOS vendor.

  3. Which source is most helpful for determining what happened immediately before an application crash on a Windows system?

    Answer: Event Viewer logs

    Event Viewer records application and system events, including error details around a crash.

  4. A problem affects every user on one floor but no one elsewhere in the building. Where should troubleshooting focus first?

    Answer: The shared network equipment serving that floor

    When a problem is limited to a group sharing common infrastructure, that shared component is the likely fault point.

  5. Which practice best helps prevent the same problem from being solved from scratch repeatedly?

    Answer: Documenting the issue and resolution in a knowledge base

    Knowledge base documentation lets others quickly apply known solutions to recurring issues.

  6. A technician suspects a faulty RAM module. Which method best confirms the theory?

    Answer: Swap in a known-good module and test

    Substituting a known-good component is a reliable way to confirm or rule out a suspected hardware fault.

  7. When troubleshooting network connectivity using the OSI model 'bottom-up' approach, what is checked first?

    Answer: Physical cabling and link lights

    The bottom-up approach starts at Layer 1, the physical layer, before moving to higher layers.

Written and edited by , founder of Practice Test Geeks, with AI assistance. We have not yet matched this exam's facts to an official source, so confirm fees, dates and rules with the exam body. Editorial policy