Technical Documentation & Standards Flashcards
7 cards from real CTP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Technical Documentation & Standards flashcards as text
Which type of drawing shows how a system or facility was actually built, including any departures from the original design?
Answer: As-built drawing
As-built drawings show the final installed condition, including field changes made during construction.
Under ISO 9001, what term covers both documents (formerly "procedures") and records?
Answer: Documented information
Since ISO 9001:2015, the term "documented information" covers both maintained documents and retained records.
What is the main purpose of a document retention schedule?
Answer: To set how long each type of record must be kept and how it is disposed of
A retention schedule sets how long records are kept to meet legal, regulatory, and business needs, and how they are disposed of afterward.
A procedure says "tighten to 25 N·m" but the shop's torque wrench reads only in ft-lb. What is the correct action?
Answer: Convert accurately (about 18.4 ft-lb) or get a wrench calibrated in N·m
Specified values must be met exactly, so the unit must be converted correctly (1 N·m ≈ 0.7376 ft-lb) or the right tool used.
Which IEEE standard is widely known for guidance on software test documentation?
Answer: IEEE 829
IEEE 829 defined software test documentation such as test plans and test reports, and was later replaced by ISO/IEC/IEEE 29119-3.
Why should a NOTE, CAUTION, or WARNING appear BEFORE the step it applies to in a procedure?
Answer: The reader needs the information before doing the action to prevent harm or damage
Placing alerts before the step makes sure the reader knows the risk before acting.
What does "traceability" mean in calibration documentation?
Answer: An unbroken chain of comparisons linking a measurement to national or international standards such as NIST
Metrological traceability links measurements through an unbroken, documented chain of calibrations to recognized standards such as NIST.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. We have not yet matched this exam's facts to an official source, so confirm fees, dates and rules with the exam body. Editorial policy