โ† All CTP Flashcard Decks

Performance Analysis & Benchmarking Flashcards

7 cards from real CTP practice questions. Tap to flip, then mark Knew It or Still Learning โ€” missed cards come back until you master them.

Read the first 7 Performance Analysis & Benchmarking flashcards as text
  1. What does the USE method check for every resource when analyzing system performance?

    Answer: Utilization, Saturation, Errors

    Brendan Gregg's USE method checks each resource for Utilization, Saturation, and Errors.

  2. The RED method, often used for microservices, focuses on which three metrics?

    Answer: Rate, Errors, Duration

    RED tracks request Rate, Error count, and request Duration for each service.

  3. A storage benchmark reports very high IOPS using 4 KB random reads with a small dataset. Why might this mislead someone sizing a production database?

    Answer: The small dataset may be served from cache, inflating the results

    If the working set fits in cache, the benchmark measures cache speed rather than real storage performance.

  4. Adding a second server doubles cost but raises throughput by only 40%. Which concept does this illustrate?

    Answer: Sublinear scalability caused by contention or coordination overhead

    Gains below proportional show sublinear scaling, often caused by contention and coherency costs.

  5. In a network, which term describes the variation in packet delay over time?

    Answer: Jitter

    Jitter is the variability in latency between packets and matters especially for voice and video.

  6. When testing whether a code change improved performance, why is it important to change only one variable at a time?

    Answer: So that any difference observed can be attributed to that specific change

    Isolating one variable means any measured change can be traced to that cause.

  7. What is the main difference between a synthetic benchmark and an application benchmark?

    Answer: Synthetic benchmarks use artificial workloads aimed at specific components; application benchmarks run real-world software

    Synthetic benchmarks isolate components with artificial loads, while application benchmarks reflect real workloads.

Written and edited by , founder of Practice Test Geeks, with AI assistance. We have not yet matched this exam's facts to an official source, so confirm fees, dates and rules with the exam body. Editorial policy