CTC Hazard Analysis 3

Question 1

A HAZOP study uses guide words applied to process parameters to identify deviations. Which guide word indicates that a parameter is completely absent?

Accepted Answer

No / None

Answer

'No' or 'None' is the HAZOP guide word indicating a complete absence of the intended parameter, such as no flow when flow is required.

Question 2

Which MIL-STD standard provides the primary DoD requirements for system safety and hazard analysis in defense test programs?

Accepted Answer

MIL-STD-882

Answer

MIL-STD-882 (System Safety) is the primary Department of Defense standard that establishes requirements for hazard identification, risk assessment, and risk management in defense programs.

Question 3

When classifying hazard severity, a condition that may cause severe injury, major occupational illness, or major property damage is typically categorized as:

Accepted Answer

Critical

Answer

Under MIL-STD-882, 'Critical' severity describes conditions that may cause severe injury, major illness, or major property/system damage short of complete loss.

Question 4

An Operational Hazard Analysis (OHA) is primarily focused on:

Accepted Answer

Hazards that arise from personnel tasks, procedures, and the operational environment

Answer

An OHA evaluates hazards associated with human tasks, operational procedures, and the environment in which the system is used or tested.

Question 5

In a test range safety context, a 'destruct zone' is defined as:

Accepted Answer

The geographic area where debris is expected to fall if a flight termination system is activated

Answer

A destruct zone (or impact zone) is the calculated area where debris would be expected to land following activation of a flight termination system, used to ensure public safety.

(CTC) Certified Test Conductor Practice Test

(CTC) Certified Test Conductor Practice Test

CTC Hazard Analysis 3