CTC Communication Protocols and Procedures 2

Question 1

During a test countdown, the test conductor initiates a 'GO/NO-GO' poll. What is the correct response from a station that is ready to proceed?

Accepted Answer

GO

Answer

In a GO/NO-GO poll, each polled station responds with 'GO' to indicate readiness to proceed or 'NO-GO' to indicate they cannot support continuation of the countdown.

Question 2

What is the purpose of a Minimum Essential Communications List (MECL) for a test event?

Accepted Answer

To identify the minimum communication links required to safely conduct the test

Answer

The MECL defines the bare minimum communication links that must be operational for the test to proceed safely, serving as a go/no-go criterion for launch or test initiation.

Question 3

During a test event, the word 'HOLD' is transmitted on the countdown net. What must all range stations do?

Accepted Answer

Cease all non-safety communications and await further instructions

Answer

A 'HOLD' command stops the countdown; all range stations must cease non-safety communications, maintain their positions, and await the test conductor's instructions.

Question 4

What does the proword 'ROGER' confirm in test range radio communications?

Accepted Answer

The receiver has received and understood the last transmission

Answer

'ROGER' means the receiver has received and understood the last transmission; unlike 'WILCO,' it does not imply the receiver will take action.

Question 5

What is a 'patch' in test range communications terminology?

Accepted Answer

An electrical or electronic connection linking two separate communication systems or nets

Answer

A 'patch' is a connection that bridges two separate communication circuits or nets, allowing personnel on different systems to communicate directly during a test event.

(CTC) Certified Test Conductor Practice Test

(CTC) Certified Test Conductor Practice Test

CTC Communication Protocols and Procedures 2