CSWP Part Modeling & Assembly Design 4

Question 1

In SOLIDWORKS, which feature is used to connect two or more profiles on parallel or non-parallel planes with a smooth transition?

Accepted Answer

Loft

Answer

Loft creates a solid by blending between two or more profiles, which can lie on different planes at different heights.

Question 2

You apply a Fillet feature after a Shell feature in the FeatureManager. What potential issue should you watch for?

Accepted Answer

The fillet may not propagate through the shelled wall

Answer

Applying a fillet after Shell may leave sharp edges inside the shelled wall if the fillet was intended to round both inner and outer walls simultaneously.

Question 3

Which SOLIDWORKS assembly tool checks whether two or more components physically overlap (interpenetrate) each other?

Accepted Answer

Interference Detection

Answer

Interference Detection calculates volumetric overlaps between selected components and reports their locations and volumes.

Question 4

In a SOLIDWORKS sketch, what does the 'Fully Defined' status (black entities) indicate?

Accepted Answer

All sketch entities have exact positions determined by dimensions and relations

Answer

Black sketch entities are fully defined, meaning dimensions and geometric relations have removed all degrees of freedom.

Question 5

When creating a Revolve feature, the profile sketch must:

Accepted Answer

Not cross the axis of revolution

Answer

The profile cannot cross the axis of revolution because that would create self-intersecting geometry, which is invalid.

(CSWP) SOLIDWORKS CAD Design Professional Practice Test

(CSWP) SOLIDWORKS CAD Design Professional Practice Test

CSWP Part Modeling & Assembly Design 4