CSWP Part Modeling & Assembly Design 4 — Questions and Answers
Question 1: In SOLIDWORKS, which feature is used to connect two or more profiles on parallel or non-parallel planes with a smooth transition?
- Sweep
- Loft (Correct answer)
- Revolve
- Boundary
Correct answer: Loft
Loft creates a solid by blending between two or more profiles, which can lie on different planes at different heights.
Question 2: You apply a Fillet feature after a Shell feature in the FeatureManager. What potential issue should you watch for?
- The fillet may not propagate through the shelled wall (Correct answer)
- The shell may override the fillet radius
- Fillets cannot be applied after Shell
- The fillet will always cause a rebuild error
Correct answer: The fillet may not propagate through the shelled wall
Applying a fillet after Shell may leave sharp edges inside the shelled wall if the fillet was intended to round both inner and outer walls simultaneously.
Question 3: Which SOLIDWORKS assembly tool checks whether two or more components physically overlap (interpenetrate) each other?
- Measure
- Clearance Verification
- Interference Detection (Correct answer)
- Collision Detection
Correct answer: Interference Detection
Interference Detection calculates volumetric overlaps between selected components and reports their locations and volumes.
Question 4: In a SOLIDWORKS sketch, what does the 'Fully Defined' status (black entities) indicate?
- All sketch entities have exact positions determined by dimensions and relations (Correct answer)
- The sketch is ready to be saved as a block
- All entities are construction geometry
- The sketch has no open contours
Correct answer: All sketch entities have exact positions determined by dimensions and relations
Black sketch entities are fully defined, meaning dimensions and geometric relations have removed all degrees of freedom.
Question 5: When creating a Revolve feature, the profile sketch must:
- Be an open profile only
- Not cross the axis of revolution (Correct answer)
- Contain at least two closed contours
- Be on the Front Plane only
Correct answer: Not cross the axis of revolution
The profile cannot cross the axis of revolution because that would create self-intersecting geometry, which is invalid.
Question 6: In SOLIDWORKS, a 'SmartMate' is best described as:
- A mate that automatically suggests and applies the most logical mate as you drag a component (Correct answer)
- A mate type specifically for gears
- A parametric relation between assembly configurations
- A mate that resizes components to fit
Correct answer: A mate that automatically suggests and applies the most logical mate as you drag a component
SmartMates detect geometry context (holes, edges, faces) as you drag and drop components, suggesting and applying the appropriate mate automatically.
Question 7: Which SOLIDWORKS feature creates equally spaced instances of a feature arranged in rows and columns?
- Circular Pattern
- Linear Pattern (Correct answer)
- Curve Driven Pattern
- Fill Pattern
Correct answer: Linear Pattern
Linear Pattern repeats a feature or body in one or two linear directions with specified spacing and instance counts.
CSWP Part Modeling & Assembly Design 4
In SOLIDWORKS, which feature is used to connect two or more profiles on parallel or non-parallel planes with a smooth transition?