Practice Test Geeks(CSWP) Certified Solidworks Professional Practice Test
← All CSWP Flashcard Decks

CSWP Drawing Views and Annotations Flashcards

6 cards from real CSWP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 CSWP Drawing Views and Annotations flashcards as text

  1. In a SolidWorks drawing, which view type is automatically projected at 90-degree angles from an existing parent view?

    Answer: Projected View

    Projected View creates orthogonal views by projecting from a parent view horizontally, vertically, or at 90-degree angles following first- or third-angle projection.

  2. A Section View in a SolidWorks drawing displays the part as if it were cut by what?

    Answer: A cutting plane

    A Section View uses a cutting plane defined by a sketch line to slice through the model, exposing interior geometry that would otherwise be hidden.

  3. What does a Detail View show in a SolidWorks drawing?

    Answer: A magnified portion of an existing view

    A Detail View enlarges a circled or profiled region of an existing view to a larger scale, making small or complex features easier to dimension and annotate.

  4. An Auxiliary View in SolidWorks is projected perpendicular to which reference?

    Answer: A selected inclined edge or surface

    Auxiliary View projects perpendicular to a selected slanted edge or face, showing the true shape and size of inclined surfaces that appear distorted in standard orthographic views.

  5. What does the Broken-out Section view do in a SolidWorks drawing?

    Answer: Shows interior features by removing a locally defined region of material

    Broken-out Section removes a user-defined spline-bounded region of the outer surface to reveal internal features without creating a complete section view.

  6. Which SolidWorks drawing view displays a sheet metal part after it has been fully unfolded?

    Answer: Flat Pattern View

    Flat Pattern View represents the sheet metal part in its completely unfolded state, showing the blank layout used for cutting and punching operations.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. solidworks.com — Test delivery, eligibility, exam format, passing score, retake policy, time limit, score validity · verified Oct 2026