Practice Test Geeks(CSWP) Certified Solidworks Professional Practice Test
← All CSWP Flashcard Decks

CSWP - Certified Solidworks Professional Loft Sweep and Advanced Part Features Flashcards

6 cards from real CSWP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 CSWP - Certified Solidworks Professional Loft Sweep and Advanced Part Features flashcards as text

  1. In a SolidWorks Sweep feature, what is the required minimum input?

    Answer: A profile sketch and a path sketch

    A Sweep requires at minimum one closed profile sketch and one path sketch along which the profile is extruded.

  2. What is the primary difference between a Loft and a Sweep feature in SolidWorks?

    Answer: A Loft blends between multiple profiles while a Sweep extrudes one profile along a path

    A Loft transitions between two or more profile sketches at different planes, while a Sweep moves a single profile along a defined path.

  3. In a SolidWorks Loft, what is the purpose of guide curves?

    Answer: To control the shape of the loft between profiles

    Guide curves pass through matching points on each profile and constrain the loft boundary shape between sections.

  4. Which option in the Sweep feature ensures the profile remains oriented consistently relative to the sweep path?

    Answer: Follow Path

    The 'Follow Path' orientation option keeps the profile perpendicular to the path tangent as it sweeps, maintaining consistent orientation.

  5. What constraint must guide curves in a Loft feature satisfy?

    Answer: They must pass through a point on each profile

    Guide curves must pierce or be coincident with a vertex or point on each loft profile to properly constrain the loft shape.

  6. Which SolidWorks feature would you use to create a helical spring shape?

    Answer: Sweep with a helix path

    A helical spring is created by sweeping a circular profile along a helix/spiral curve defined by the Helix and Spiral tool.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. solidworks.com — Test delivery, eligibility, exam format, passing score, retake policy, time limit, score validity · verified Oct 2026