Practice Test Geeks(CSWP) Certified Solidworks Professional Practice Test
← All CSWP Flashcard Decks

CSWP - Certified Solidworks Professional Loft Sweep and Advanced Part Features Flashcards

6 cards from real CSWP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 CSWP - Certified Solidworks Professional Loft Sweep and Advanced Part Features flashcards as text

  1. Which SolidWorks feature creates a thin-walled hollow part by removing material from the inside of a solid?

    Answer: Shell

    The Shell feature hollows out a solid body to a specified wall thickness, with options to open selected faces.

  2. In SolidWorks, what is the effect of applying a 'Draft' feature to a face after extrusion?

    Answer: Tilts the face by a specified angle relative to a neutral plane or pull direction

    The Draft feature angles selected faces about a neutral plane by the specified draft angle, simulating mold taper for manufacturing.

  3. What is the purpose of 'Start/End Constraints' in a SolidWorks Loft feature?

    Answer: Controls the tangency direction of the loft at its start and end profiles

    Start/End Constraints such as None, Normal to Profile, or Tangency to Face control how the loft surface transitions at the first and last profiles.

  4. In SolidWorks, what does the 'Thin Feature' option in an Extrude dialog do?

    Answer: Creates a solid from an open sketch contour by adding thickness to it

    The Thin Feature option allows an open (non-closed) sketch profile to be extruded by adding a specified wall thickness to the open contour.

  5. When creating a Swept Cut in SolidWorks, what type of geometry does it remove?

    Answer: Material swept along a path, leaving a channel or groove

    A Swept Cut removes material by sweeping a closed profile along a path, creating grooves, channels, or complex cut shapes.

  6. Which SolidWorks Loft option controls whether the loft is closed (looped back to the first profile)?

    Answer: Close Loft

    The 'Close Loft' checkbox in the Loft PropertyManager connects the last profile back to the first profile, creating a closed loop solid.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. solidworks.com — Test delivery, eligibility, exam format, passing score, retake policy, time limit, score validity · verified Oct 2026