CSWP - Certified Solidworks Professional Loft Sweep and Advanced Part Features Flashcards

In SolidWorks, what does a 'Dome' feature do?

Answer: Creates a dome-shaped protrusion on a flat or curved face

The Dome feature adds a smooth convex or concave bulge to a selected flat or non-planar face of a solid body.

What is the purpose of the 'Indent' feature in SolidWorks?

Answer: Creates a cavity in one body by using another body as a tool

The Indent feature uses one solid body as a tool to press a matching cavity or protrusion shape into a target body.

Which feature in SolidWorks is used to create a tapered extrusion where the walls angle inward or outward?

Answer: All of the above are valid methods

Draft can be applied during an extrusion via the Draft option, or added afterward using the Draft feature, or achieved through a Loft — all produce tapered walls.

In a SolidWorks Loft, what does the 'Centerline Parameters' option allow you to do?

Answer: Use a centerline curve to guide the overall loft axis direction

The Centerline Parameters option uses a selected curve to control the loft's central axis, influencing how profiles are interpolated along the path.

What is a 'Boundary Boss/Base' feature in SolidWorks?

Answer: A feature that creates a solid between profiles in two directions using boundary curves

Boundary Boss/Base creates a solid by blending profiles defined in two perpendicular directions, providing more control than a standard Loft.

When using the Sweep feature with a Pierce relation, where should the path pierce the profile sketch plane?

Answer: Through the profile sketch entity to link the path endpoint to the profile

A Pierce relation constrains the path curve to pass through (pierce) a specific point on the profile sketch, ensuring the profile follows the path correctly.