Student Safety & Transportation Regulations Flashcards

What is the primary purpose of a child-check (post-trip) alarm system on a school bus?

Answer: Ensure the driver walks to the rear to check for sleeping or left-behind students

Child-check systems force the driver to walk to the back of the bus after a route, preventing students from being left aboard.

NHTSA guidance and most states recommend conducting school bus emergency evacuation drills how often at minimum?

Answer: At least twice per school year

Evacuation drills are generally recommended at least twice a year, typically early in each semester.

When students must cross the road after exiting the bus, where should they cross?

Answer: In front of the bus, at least 10 feet ahead, after the driver's signal

Students should cross in front of the bus, about 10 feet ahead where the driver can see them, only on the driver's signal.

What does the alternating amber warning light on a school bus indicate?

Answer: The bus is preparing to stop to load or unload students

Amber lights warn motorists that the bus is about to stop; red lights indicate it has stopped to load or unload.

Which type of mirrors allows a seated school bus driver to see the area directly in front of the bus?

Answer: Crossview mirrors

Crossview mirrors mounted on the front fenders let drivers see the danger zone in front of the bus as required by FMVSS 111.

An approaching motorist passes a stopped school bus with red lights flashing and stop arm extended. What should a transportation supervisor ensure drivers do?

Answer: Record vehicle details and report the illegal pass per state procedure

Drivers should document plate number, vehicle description, time and location and report the violation to law enforcement.

When should loading and unloading at a bus stop not be performed?

Answer: When the driver cannot see all students or traffic has not stopped

Students should only board or exit when the driver has accounted for them and traffic has stopped.