Construction Documents & Specifications Flashcards

Which UniFormat Level II category would include exterior wall cladding systems?

Answer: B - Shell

UniFormat Level II 'B - Shell' encompasses the building enclosure including superstructure, exterior enclosure, and roofing.

In the three-part SectionFormat, which part contains quality assurance requirements?

Answer: Part 1 - General

Quality assurance requirements such as installer qualifications, mock-ups, and testing laboratory requirements are located in Part 1 - General.

A project specification references ASTM A36 for structural steel. This is an example of what type of reference standard?

Answer: A consensus standard

ASTM standards are developed through a consensus process involving industry stakeholders and are thus classified as consensus standards.

What is the purpose of a 'Basis of Design' product specification?

Answer: To establish performance benchmarks using a named product while allowing equals

A Basis of Design specification names a specific product to define the standard of quality while permitting equivalent alternatives that meet all listed criteria.

Construction documents issued for bidding must include which of the following to be legally binding?

Answer: Addenda acknowledgment in the bid form

Bidders must acknowledge receipt of all addenda in their bid submission to ensure the bid is based on the complete, current set of documents.

Which section of Division 01 - General Requirements typically addresses the contractor's construction schedule?

Answer: 01 32 00 - Construction Progress Documentation

Section 01 32 00 covers construction progress documentation requirements including CPM schedules, progress reports, and schedule updates.

When a specification uses the word 'shall,' what obligation does it impose?

Answer: A mandatory requirement

'Shall' in specification language is universally understood to impose a mandatory requirement that must be fulfilled by the contractor.