CSCS Safe Working Practices 3

Question 1

What is the maximum weight a single person should manually handle without a risk assessment recommending mechanical assistance?

Accepted Answer

25 kg

Answer

As a general guideline, loads over 25 kg are considered high risk for a single handler and typically require a risk assessment and potential mechanical assistance.

Question 2

Which of the following is a leading cause of fatalities on US construction sites?

Accepted Answer

Falls from heights

Answer

Falls from heights are consistently the leading cause of construction fatalities, representing a significant portion of OSHA's 'Fatal Four'.

Question 3

When should a safety harness be inspected?

Accepted Answer

Before every use and by a competent person at regular intervals

Answer

Harnesses must be visually inspected by the user before each use and formally inspected by a competent person at manufacturer-recommended intervals.

Question 4

What is a 'permit to work' system used for on construction sites?

Accepted Answer

Controlling high-risk tasks to ensure proper precautions are in place before work begins

Answer

A permit to work is a formal document that authorizes specific high-risk tasks and confirms that all necessary safety measures are in place.

Question 5

What does LOTO stand for in construction safety?

Accepted Answer

Lockout/Tagout

Answer

LOTO (Lockout/Tagout) is a safety procedure to ensure that dangerous machines are properly shut off and cannot be restarted before maintenance or servicing.

CSCS - Construction Skills Certification Scheme Practice Test

CSCS - Construction Skills Certification Scheme Practice Test

CSCS Safe Working Practices 3