Practice Test GeeksCSCS Ireland Practice Test
← All CSCS IRELAND Flashcard Decks

PPE and Fire Safety Flashcards

6 cards from real CSCS IRELAND practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 PPE and Fire Safety flashcards as text

  1. What colour is a CO2 fire extinguisher in Ireland?

    Answer: Red body with a black label/band

    All fire extinguishers in Ireland and the EU must have a red body. The type of extinguishing agent is identified by the colour of the label or band: CO2 has a black band.

  2. What is the first action a construction worker should take upon discovering a fire on site?

    Answer: Raise the alarm immediately to warn others, then evacuate

    The first priority is always to raise the alarm to warn others on site. Only attempt to fight a small fire with an extinguisher if you have been trained, the fire is small, and you have a clear escape route.

  3. What does the acronym PASS stand for when using a fire extinguisher?

    Answer: Pull, Aim, Squeeze, Sweep

    PASS is the standard technique: Pull the pin, Aim the nozzle at the base of the fire, Squeeze the handle to discharge, and Sweep from side to side at the base of the flames.

  4. How often must fire extinguishers on a construction site be inspected in Ireland?

    Answer: Annually by a competent person, with monthly visual checks by site personnel

    Fire extinguishers must be inspected annually by a competent service engineer. In addition, site personnel should carry out monthly visual checks to confirm they are in position, undamaged, and the pressure gauge is in the green zone.

  5. What does a green safety sign indicate on a construction site?

    Answer: Safe conditions, including emergency exits, first aid, and assembly points

    Green signs indicate safe conditions, such as the location of emergency exits, first aid stations, and assembly points. They guide people to safety during an emergency.

  6. What type of safety footwear is required on most Irish construction sites?

    Answer: Steel toe cap boots rated to EN ISO 20345 with penetration-resistant midsole

    Construction safety footwear must meet EN ISO 20345, providing steel (or composite) toe cap protection against impact and compression, plus a penetration-resistant midsole to protect against nails and sharp objects.

How this page was made: written with AI tools and published by Nathan Beja, founder of Practice Test Geeks, who is responsible for its content. Exam facts are checked against the official sources listed below. Not reviewed by a subject-matter expert. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. solas.ie — Test delivery, eligibility, fees, renewal, score validity, exam information · verified Oct 2026