CPS Firefighter Test Mechanical Aptitude and Principles Questions and Answers 1

Question 1

A firefighter is using a Halligan bar to pry open an inward-swinging door. To generate the maximum amount of force on the door lock, where should the firefighter apply effort to the bar?

Accepted Answer

As far from the door as possible on the handle.

Answer

A Halligan bar is a class 1 lever. To maximize the mechanical advantage, the effort must be applied at the point farthest from the fulcrum (where the tool pivots on the door frame). Applying force at the end of the handle maximizes this distance and thus the output force.

Question 2

In the gear train shown, the large driver gear (A) is turning clockwise. In which direction will the small gear (C) turn, and how will its speed compare to gear A?

Accepted Answer

Clockwise and faster

Answer

When two external gears mesh, they turn in opposite directions. Gear A (clockwise) turns Gear B (counter-clockwise). Gear B (counter-clockwise) then turns Gear C (clockwise). Because Gear C is smaller than Gear A, it has fewer teeth and must complete more revolutions in the same amount of time, making it turn faster.

Question 3

Hydraulic rescue tools, such as the 'Jaws of Life,' are capable of generating immense force to cut through metal and spread crushed vehicle frames. This technology is a direct application of which scientific principle?

Accepted Answer

Pascal's Principle

Answer

Pascal's Principle states that pressure applied to a confined, incompressible fluid is transmitted equally throughout the fluid. Hydraulic tools use a pump to apply pressure to a small volume of fluid, which then acts on a larger piston, multiplying the force significantly.

Question 4

A firefighter needs to carry a 28-foot extension ladder alone. To maintain balance and stability with the least amount of effort, the firefighter should position their shoulder at what point on the ladder?

Accepted Answer

At the ladder's marked center point or balance point.

Answer

To balance an object for a single-person carry, it must be supported at its center of gravity. This is the point where the object's weight is evenly distributed on all sides. Carrying the ladder at this balance point prevents it from tipping forward or backward, allowing for a more stable and less strenuous carry.

Question 5

Superheated gases and smoke rise from a fire on the first floor and travel along the ceiling, rapidly heating the entire upper portion of the room. This movement of heat through the flow of gases is the primary example of which form of heat transfer?

Accepted Answer

Convection

Answer

Convection is the transfer of heat through the movement of fluids (which includes liquids and gases). In a fire, hot gases become less dense and rise, carrying thermal energy with them and spreading it throughout the upper levels of a structure.

CPS Firefighter Test Practice Test

CPS Firefighter Test Practice Test

CPS Firefighter Test Mechanical Aptitude and Principles Questions and Answers 1