Quality Control & Compliance Flashcards
7 cards from real CPS practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Quality Control & Compliance flashcards as text
Which quality tool is BEST suited for prioritizing the most significant sources of defects in a process?
Answer: Pareto chart
A Pareto chart ranks defect categories by frequency, allowing teams to focus on the vital few causes that account for most problems.
A process audit differs from a product audit in that a process audit:
Answer: Examines whether processes are followed as documented
A process audit verifies that documented procedures are being followed correctly, while a product audit evaluates conformance of the output.
Which type of control chart is most appropriate for monitoring the proportion of defective units in a large batch?
Answer: p-chart
The p-chart monitors the proportion (fraction) defective in subgroups and is used when subgroup size varies.
What is the key difference between verification and validation in quality management?
Answer: Verification checks design requirements; validation confirms fitness for intended use
Verification confirms the product meets specified requirements, while validation confirms it meets the needs of the intended use or application.
A supplier consistently delivers parts that are within spec but at the edge of tolerances. Which quality concept addresses the cost of this scenario?
Answer: Taguchi loss function
The Taguchi loss function shows that any deviation from the target value — even within spec — causes increasing quality loss.
Under 21 CFR Part 820 (FDA Quality System Regulation), which document provides the overall framework for a medical device manufacturer's quality system?
Answer: Quality system regulation (QSR) manual
The Quality System Regulation manual describes the overall quality system and how the manufacturer meets 21 CFR Part 820 requirements.
Which statistical distribution is typically assumed when applying acceptance sampling plans from ANSI/ASQ Z1.4?
Answer: Binomial distribution
ANSI/ASQ Z1.4 is based on the binomial distribution, which models the probability of a given number of defectives in a sample.
Written and edited by Nathan Beja, founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy
Sources & references
Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy
- isa.org — Test delivery, eligibility · verified Nov 2026
- smctraining.com — Test delivery, eligibility, exam information · verified Nov 2026