← All CPS Flashcard Decks

Quality Assurance & Improvement Flashcards

7 cards from real CPS practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Quality Assurance & Improvement flashcards as text
  1. In the context of quality improvement, 'special cause variation' is best addressed by:

    Answer: Identifying and eliminating the specific assignable cause

    Special cause variation is non-random and attributable to a specific identifiable source; it must be found and eliminated rather than accommodated through design changes.

  2. A first-time yield (FTY) of 85% means:

    Answer: 85% of units pass through the process without any defect or rework

    First-time yield measures the percentage of units that complete a process step or entire process correctly without any rework, repair, or scrap.

  3. Which quality framework focuses on organizational excellence through seven interconnected criteria including leadership, strategy, and results?

    Answer: Malcolm Baldrige National Quality Award criteria

    The Malcolm Baldrige Performance Excellence Framework uses seven criteria categories to assess and guide organizational performance improvement across all sectors.

  4. When conducting a process FMEA, a high 'detection' rating (e.g., 9 or 10) indicates:

    Answer: Current controls are very unlikely to detect the failure mode

    In FMEA, detection is scored inversely — a high score (9–10) means existing controls have very little chance of catching the failure, increasing the RPN.

  5. A supplier quality engineer is reviewing incoming material and decides to use 'skip-lot inspection.' This approach means:

    Answer: Some lots are exempt from inspection based on demonstrated supplier performance history

    Skip-lot inspection reduces inspection frequency for suppliers with a proven track record of conformance, allocating inspection resources more efficiently.

  6. Which of the following is a key input to the 'Measure' phase of the DMAIC methodology?

    Answer: A defined problem statement and process map with identified measurement points

    The Measure phase begins with the Define phase output (problem statement, project charter) and requires a process map to identify where and what to measure.

  7. In quality management, 'acceptance sampling' is best described as:

    Answer: A statistical method to decide whether to accept or reject a lot based on a sample

    Acceptance sampling uses statistical rules (e.g., MIL-STD-1916, ANSI/ASQ Z1.4) to decide whether an entire lot should be accepted or rejected based on inspection of a random sample.

Written and edited by , founder of Practice Test Geeks, with AI assistance. Exam facts are checked against the official sources linked below. Editorial policy

Sources & references

Exam facts on this page (fees, format, dates, passing scores) are checked against these official sources; the date is our last check. Editorial policy

  1. isa.org — Test delivery, eligibility · verified Nov 2026
  2. smctraining.com — Test delivery, eligibility, exam information · verified Nov 2026