CPR Equipment Operation & Site Safety 2

Question 1

When operating a scissor lift on a priority restoration site, what is the maximum allowable side slope before operation must stop?

Accepted Answer

5 degrees

Answer

Most scissor lifts are rated for a maximum 5-degree side slope; exceeding this creates tip-over risk on uneven disaster sites.

Question 2

Which document must an equipment operator review BEFORE using a piece of restoration equipment for the first time on a job site?

Accepted Answer

The manufacturer's operator manual

Answer

The manufacturer's operator manual contains rated capacities, safety warnings, and operating procedures specific to that machine.

Question 3

A crew member notices hydraulic fluid leaking from an excavator arm. What is the correct immediate action?

Accepted Answer

Tag out and remove the machine from service

Answer

A hydraulic leak constitutes a mechanical defect requiring lockout/tagout and removal from service until properly repaired.

Question 4

What is the primary purpose of a pre-task safety plan (PTP) completed before each shift on a CPR site?

Accepted Answer

Identify site-specific hazards and controls for the day's tasks

Answer

A pre-task plan identifies that day's specific hazards, assigns controls, and ensures all crew members are briefed before work begins.

Question 5

When using a chainsaw for debris removal, the operator's left hand should maintain which grip position?

Accepted Answer

Wrap-around grip on the front handle bar

Answer

A wrap-around grip on the front handlebar provides maximum control and activates the chain brake should kickback occur.

(CPR) Certified Priority Restoration Practice Test