CPO CPO Emergency Procedures & Incident Response 1

Question 1

What is the first action an operator should take if a concrete pump boom contacts an overhead power line?

Accepted Answer

Stay in the cab and call 911, warning others to stay away from the machine

Answer

If the boom contacts a power line, remain in the cab (do not become a path to ground), call emergency services, and warn bystanders to stay clear.

Question 2

When should a concrete pump operator activate the emergency stop?

Accepted Answer

Whenever a person is in danger, equipment is malfunctioning, or an unsafe condition is observed

Answer

The emergency stop must be activated any time personnel are endangered, equipment is behaving unsafely, or a hazardous condition is detected.

Question 3

What should be done if a worker is struck by or trapped under the concrete pump boom?

Accepted Answer

Activate emergency stop, call 911, and do not move the victim unless directed by emergency responders

Answer

In a struck-by incident, immediately stop all operations, call 911, and avoid moving the victim to prevent further injury.

Question 4

What is the correct response if a concrete pipeline suddenly bursts during pumping?

Accepted Answer

Immediately stop the pump, relieve pressure, and evacuate the hazard zone

Answer

A burst pipeline releases high-pressure concrete that can cause serious injuries; stop the pump, relieve pressure, and clear all personnel from the area.

Question 5

Which document must be completed after any on-site accident or near-miss involving a concrete pump?

Accepted Answer

Incident/accident report

Answer

An incident or accident report must be completed after any on-site accident or near-miss to document the event and support regulatory compliance.

CPO - Concrete Pump Operator Certification Practice Test

CPO - Concrete Pump Operator Certification Practice Test

CPO CPO Emergency Procedures & Incident Response 1