CPII Safety Protocols 5

Question 1

An inspector is required to work alone in a remote location with no cell service. What safety measure is MOST critical before beginning solo work?

Accepted Answer

Establish a check-in/check-out protocol with a designated contact who will initiate emergency response if contact is missed

Answer

A formal check-in/check-out procedure with a responsible contact ensures emergency response is triggered if the lone worker becomes incapacitated.

Question 2

During inspection of a water main construction site, a worker is found using an angle grinder without eye or face protection. Under OSHA rules, who bears primary responsibility for ensuring PPE compliance at a multi-employer worksite?

Accepted Answer

The controlling employer and the worker's direct employer both share responsibility

Answer

OSHA's multi-employer worksite policy holds both the controlling employer (owner/general contractor) and the creating/exposing employer responsible for PPE enforcement.

Question 3

What is the maximum decibel level at which an unprotected worker may be exposed for an 8-hour work shift per OSHA's noise standard?

Accepted Answer

90 dB(A)

Answer

OSHA 29 CFR 1910.95 establishes 90 dB(A) as the permissible exposure limit (PEL) for an 8-hour time-weighted average without hearing protection.

Question 4

A public infrastructure inspector finds a structure with visible lead paint that is being disturbed by grinding. Under EPA's Renovation, Repair, and Painting (RRP) Rule, what is the minimum required action?

Accepted Answer

Ensure the contractor is EPA RRP-certified and workers are using required containment and protective measures

Answer

EPA's RRP Rule requires contractors to be certified and to follow lead-safe work practices including containment; the inspector's role is to verify compliance.

Question 5

Which of the following is a key requirement of an emergency action plan (EAP) for an infrastructure inspection project under OSHA 29 CFR 1910.38?

Accepted Answer

Procedures for reporting emergencies, evacuation routes, and designated assembly points

Answer

OSHA 1910.38 requires EAPs to include emergency reporting procedures, evacuation procedures, and assembly areas where workers can be accounted for.

(CPII) Certified Public Infrastructure Inspector Practice Test

(CPII) Certified Public Infrastructure Inspector Practice Test

CPII Safety Protocols 5