CPII Plans, Specifications & Documentation 3

Question 1

A 'line and grade' shown on infrastructure plans refers to:

Accepted Answer

The horizontal alignment and vertical elevation profile for constructed features

Answer

Line refers to the horizontal alignment and grade refers to the vertical slope or elevation profile of a roadway, pipe, or other linear feature.

Question 2

What does a 'typical section' drawing in a road project show?

Accepted Answer

A cross-sectional view showing standard dimensions, materials, and slopes for the roadway

Answer

A typical section shows a cross-sectional view of the roadway illustrating standard lane widths, shoulder dimensions, pavement layers, and side slopes.

Question 3

Which specification format part contains the products, materials, and equipment requirements?

Accepted Answer

Part 2 — Products

Answer

In the three-part CSI specification format, Part 2 — Products covers materials, manufactured items, equipment, and mixes.

Question 4

When an inspector discovers that a contractor has deviated from approved shop drawings, the correct first action is to:

Accepted Answer

Document the deviation and notify the engineer for direction

Answer

The inspector should document the deviation and notify the responsible engineer, who will determine whether correction, acceptance, or rejection is appropriate.

Question 5

A 'bench mark' referenced on construction plans is:

Accepted Answer

A permanent point of known elevation used as a vertical reference for construction

Answer

A bench mark is a permanent monument with a precisely known elevation that serves as the vertical datum for staking and verification during construction.

(CPII) Certified Public Infrastructure Inspector Practice Test

(CPII) Certified Public Infrastructure Inspector Practice Test

CPII Plans, Specifications & Documentation 3